Piezas para impresoras

Creality 3D Printing Containers: STL Files to Print

This collection gathers 3D-printable containers made for Creality setups: desiccant holders for filament dryers, silica gel inserts for spools, CFS parts and small waste bins. It is useful when you want to keep filament dry or tidy the area around a 3D printer. Each entry points to a model page where the author describes dimensions, parts and print settings. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 45 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 2546 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 2546 modelos
Sobre la categoría

«Creality 3D Printing Containers: STL Files to Print»

Most entries fall into a few groups. Desiccant containers for filament dryers hold silica gel near the spool while it dries, and they differ mainly in how air reaches the gel and how the lid closes. Silica holders that sit inside a spool hub are smaller and rely on the openings already present in the spool. CFS-related parts cover containers, mounts and covers for the multi-filament unit, while waste bins and chutes collect purged material at the printer.

When choosing, start with the dimensions on the model page: outer size, wall thickness and the diameter of the opening. Check how many parts the model has and whether the author printed it with supports, and look at photos of real prints to see how the lid or the holes turned out. For parts that sit in a dryer, note the material and settings the author lists, since a warm chamber affects how a printed container behaves.

To find more, try synonyms and related terms: desiccant holder, silica gel box, spool insert, filament dryer accessory, purge bin, poop chute, tool holder. Combining a printer name with the function usually narrows results faster than a broad word like container. Related topics such as filament storage, dry boxes and printer organizers often lead to models that serve the same purpose.

FAQ

Preguntas frecuentes

What is a desiccant container for a 3D printer?
It is a printed box or tube that holds silica gel so the beads sit near filament and take up moisture. Designs vary in capacity, hole size and whether they close with a lid or a screw cap.
How do I pick the right size for my spool?
Measure the hub opening and the inner width of the spool first, then compare those numbers with the dimensions listed on the model page. Some holders sit inside the hub, others hang on the spool rim.
Do these containers need supports?
It depends on the geometry: many are printed as a single open shape with holes on the sides or bottom. The author's photos and print notes show the orientation and whether supports were used.
Which filament works for a container that goes into a dryer?
Look at the temperature the author mentions for the dryer and compare it with the heat resistance of the material you plan to use. PLA, PETG and ABS behave differently in a warm chamber, so read the model page notes before printing.
Relacionado
Piezas para impresoras

Creality 3D Printer Waste Container STL Models

90323 modelos
Piezas para impresoras

Creality 3D Printer Accessories: STL Models to Browse

92797 modelos
Hogar

3D Models of Containers: STL Files for Printing

110747 modelos
Piezas para impresoras

Creality K2 3D Printer Accessories and STL Upgrades

452665 modelos
Piezas para impresoras

Creality Extruder 3D Models: STL Parts and Upgrades

48037 modelos
Piezas para impresoras

CFS Creality 3D Printing Accessories: STL Models

37914 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías