Deporte y fitness

Bike Holders: Wall Mounts, Bottle and Tracker STL Files

This collection gathers 3D models that hold a bicycle or something attached to it: wall brackets, service stands, bottle and cup cages, tracker and phone mounts. Most of these parts are small enough to print on a desktop 3D printer and are meant to be bolted, strapped or clamped to a frame, a bar or a wall. The variety is wide, so the useful step is comparing how each design attaches before you commit to a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 13/10/2026

Ver la colección Mostrar todos: 476325 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 476325 modelos
Sobre la categoría

«Bike Holders: Wall Mounts, Bottle and Tracker STL Files»

Wall-mounted designs and service stands hold the whole bike, often lifting a wheel off the floor or keeping the frame upright for maintenance; some include a hook for a helmet. Bottle and cup holders, by contrast, are frame- or bar-mounted and sized around a specific container diameter. Tracker mounts are a third group: they wrap an AirTag or a similar tag onto a fork, frame tube or seat area, and their fit depends on the tube diameter the author measured.

When choosing a model, read the author's page for the tube or container diameter, the wall thickness of the clamp, the number of separate parts and whether screws, straps or inserts are needed. Check whether the part is meant to be printed in a material that tolerates outdoor use and vibration, and look at photos of real prints to see how the clamp closes and where the load sits. Orientation matters too: a bracket printed flat may be weaker across the layers than one printed on its side.

If a search returns little, try related wording: bottle cage, cup holder, wall bracket, garage hook, repair stand, fork mount, handlebar mount, phone mount, tag holder. Adding the item you want to carry, such as a specific bottle size or a tracker model, narrows results faster than the word holder alone. Combining a mounting term with a bike type, like MTB, e-bike or balance bike, also shifts what the search shows.

FAQ

Preguntas frecuentes

What measurements do I need before printing a bike holder?
The diameter of the tube, bar or container the holder grips, plus the thickness of the frame where it clamps. Authors usually list these on the model page, and a few tenths of a millimeter can decide whether the fit is snug.
Do these holders need supports?
It depends on the shape. Brackets with overhangs or closed loops often do, while flat-backed wall plates usually print without them. The model page or the print notes are the place to confirm this.
Which material works for a part that stays outdoors?
Parts exposed to sun and rain are commonly printed in ASA, PETG or a UV-resistant filament, while indoor brackets are often made in PLA. Check what the author used and how the part is loaded.
Can I adapt a holder to a different tube size?
Sometimes. Scaling the model changes every dimension, including screw holes, so a small offset applied to the clamp opening is often a better route than uniform scaling.
Relacionado
Deporte y fitness

Bicycle 3D Models: Mounts, Stands and STL Parts

11536 modelos
Deporte y fitness

3D Models for Bicycle Parts and Accessories

87326 modelos
Deporte y fitness

Bottle Holders for Bike Handlebars: 3D Models & STL

591844 modelos
Deporte y fitness

Bike Stand 3D Models: STL Wall Mounts and Kickstands

3667 modelos
Deporte y fitness

Bicycle Keychain 3D Models and STL Files

2216 modelos
Deporte y fitness

Bicycle Cup and Bottle Holders: 3D Models and STL Files

12180 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías