Electrónica

RJ45 Ethernet 3D Models: STL Parts for Cables and Ports

This collection gathers STL files for RJ45 and Cat6 hardware: repair clips, cable prep tools, dust covers, wall plates and locking parts. Most of it is small, flat-printed geometry that a desktop 3D printer handles in a short session. It is useful when a plug tab snaps, a socket sits open, or a cable run needs tidier mounting. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 1316 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 1316 modelos
Sobre la categoría

«RJ45 Ethernet 3D Models: STL Parts for Cables and Ports»

The parts fall into a few groups. Repair clips and replacement tabs restore a plug whose latch has broken, while straighteners and untwist tools hold the pairs flat before crimping. Covers and caps close unused sockets or plug ends, wall plates and keystone holders fix modules to a surface, and locks or retention pieces keep a cable from being pulled out. Some items combine several functions in one print, such as a cover that also carries a keyring loop.

When choosing a model, read the author's page for the connector standard it was drawn around, the number of parts, and whether supports are needed. Snap fits and thin latches depend on layer orientation and material: a tab printed flat in a stiff filament behaves differently from one printed upright in a more flexible one. Check the wall thickness against your plug or socket, and look at photos of real prints to judge how the latch and the cable channel came out.

To widen the search, try the terms people use for the same hardware: 8P8C, Cat5e, Cat6, keystone, patch panel, LAN port, crimp tool. Related topics that often appear alongside are cable management, desk and rack organizers, and label holders for marking runs. If a result is close but not exact, search for the connector type plus the part name, for example a socket cap or a plug latch, rather than the cable as a whole.

FAQ

Preguntas frecuentes

Do these parts fit both Cat5e and Cat6 connectors?
It depends on the model. The outer shape of an RJ45 plug is standard, but the cable channel and strain relief differ between cable types, so check the dimensions the author lists before printing.
Which material works for a snap-fit latch?
Stiff filaments hold shape but can crack at a thin hinge, while more flexible ones bend without breaking and grip less firmly. The author's page usually names the material and settings used for the test print.
Do small covers and caps need supports?
Usually not, because they are printed flat with the opening facing up. Parts with an overhanging clip or a closed pocket may need them, and the model page should say so.
How do I find a mount for a specific module?
Search for the module type plus the word holder, plate or mount, and compare the cutout size with your module. Keystone is the common term for the snap-in format used in wall plates and patch panels.
Relacionado
Electrónica

Ethernet RJ-45 3D Models: Repair Clips and Covers

9294 modelos
Objetos

5.45x39 3D Models and STL Files for Display

226960 modelos
Objetos

45-Degree Jigs and Angle Parts: 3D Models

10255 modelos
Para niños

3D Models for Fraction Learning and Sorting

11186 modelos
Herramientas y equipos

45 Rubber 3D Models: Ammo Boxes and Band Guns

2144 modelos
Electrónica

8-Inch Speaker Spacers: 3D Models and STL Files

12583 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías