Electrónica

FPV Mark 4 V2 and O4 3D Printed Mounts and Parts

This collection gathers STL files for FPV Mark 4 V2 frames and O4 air units, including antenna mounts, camera mounts, GPS holders, and TPU guards. It helps you find printable parts that match a frame or air unit before you commit to a build. Check each model page for the exact hardware and print details. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 3 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 2988 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 2988 modelos
Sobre la categoría

«FPV Mark 4 V2 and O4 3D Printed Mounts and Parts»

Antenna mounts range from simple brackets to multi-arm holders that position antennas away from props. Camera and air-unit mounts vary by air unit model, mounting pattern, and whether they replace a stock canopy or sit on the frame. GPS holders often combine a puck cradle with antenna tubes, while TPU guards and full kits protect exposed frame edges and electronics.

Before printing, check the dimensions and scale on the author's page, the number of parts, and whether supports are needed. Look at the material and settings the author lists, since TPU and rigid filaments behave differently for mounts that flex or carry loads. Photos of real prints can show how a part sits on a frame and where fasteners go.

To narrow the search, try synonyms such as quadcopter, cinewhoop, or racing frame, and pair them with terms like antenna bracket, camera canopy, or GPS mast. Related searches include action-camera mounts, connector brackets, and frame protection plates. If a result is close but not exact, look at the tags and related models on the page, then adjust the frame size or air-unit name in the query.

FAQ

Preguntas frecuentes

What is an O4 air unit mount?
It is a printed holder or canopy that positions a digital air unit and its camera on an FPV frame. Check the mounting pattern and camera size on the model page.
Which filament should be used for FPV mounts?
Many mounts use TPU for flexibility, while stiffer parts may use other filaments. The author's page usually lists the material and settings they used.
How do I find a mount for a specific frame?
Search by frame name, frame size, and air-unit model, then compare the screw spacing and part dimensions. Tags and related models can help narrow the list.
Can a printed mount for one FPV frame be adapted to another frame?
Sometimes a mount can be modified by scaling or drilling, but the mounting holes and clearance must be checked. Look at the part's dimensions and photos before changing anything.
Relacionado
Electrónica

FPV Mark 4 V2 3D Printing Parts and Mounts

513265 modelos
Vehículos

FPV Drone 3D Models: Frames, Mounts, Propellers

5357 modelos
Electrónica

STL Files for 8-Inch FPV Drone Frames and Mounts

2301 modelos
Electrónica

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061 modelos
Electrónica

FPV Mark 4 V2 STL: Mounts, Kits and Plates

447686 modelos
Hobbies y makers

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

2441 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías