Cocina

Kitchen Fan 3D Models: Knobs, Vents and Parts

This collection gathers 3D printing files tied to kitchen fans and the parts around them: knobs, duct fittings, covers and mounts, plus a few kitchen gadgets. It helps when an original handle breaks, a vent needs an adapter, or a housing has to be reproduced. Most entries are small STL parts that print on a standard 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 15/10/2026

Ver la colección Mostrar todos: 2620 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 2620 modelos
Sobre la categoría

«Kitchen Fan 3D Models: Knobs, Vents and Parts»

Fan knobs and control parts are usually small, single-piece prints that replace a cracked handle or add grip. Vent and duct items are larger and appear as adapters, grilles or dampers, often split into sections because of build volume. Covers, mounts and replacement parts sit between the two: they copy an existing housing or bracket and depend on accurate measurements taken from the original.

Before printing, read the author's page for dimensions, the number of parts and whether supports are needed. Check the material and settings that are listed, since parts near a hob or inside a duct see heat and grease. Photos of real prints show how surfaces, threads and thin walls came out.

If a search returns too much, narrow it with words such as knob, handle, duct adapter, wall vent, damper, bracket or cover, and add the appliance type. Related searches like range hood, extractor, cabinet vent or printer cooling fan lead to neighbouring sets. Measuring the original part first makes the choice quicker.

FAQ

Preguntas frecuentes

What measurements matter for a kitchen fan part?
The mounting hole spacing, shaft or spindle size, and the outer dimensions of the part being replaced. Compare them with the numbers on the model page before printing.
Do these parts need supports?
It depends on the shape. Overhangs on knobs and covers are often printed without them, while ducts and brackets may need them; the author's page usually states this.
How do I find a cover or grille for an older fan?
Search by appliance type plus cover, grille or vent, then compare the listed dimensions with the opening on your unit. Photos of installed prints help judge the shape.
Which material is used for parts near a stove?
Authors list a material and settings on the model page, and some note where the part sits. Read those notes and look at photos of printed parts before deciding.
Relacionado
Cocina

Kitchen 3D Models and STL Files for Everyday Use

145309 modelos
Electrónica

Fan 3D Models: Hand Fans, Grills and Ducts

326145 modelos
Cocina

Kitchen Blender 3D Models: STL Files to Print

147518 modelos
Cocina

Kitchen Spatula 3D Models and STL Utensil Holders

2436 modelos
Piezas para impresoras

Fan Covers for 3D Printers: STL Models to Browse

165947 modelos
Cocina

Kitchen Utensil Holder 3D Models and STL Files

8749 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías