Cocina

3D Models for Aluminum Can Lids and Covers

This collection gathers printable lids, caps and covers made for aluminum drink and food cans. The models range from simple snap-on discs to parts that combine a lid with an opener or a sliding closure. It is useful when you want to close an opened can, keep the top clean or replace a lost cap, and you can print the part on a home 3D printer in a single short job. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 6 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 63359 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 63359 modelos
Sobre la categoría

«3D Models for Aluminum Can Lids and Covers»

The most common group is the plain snap-on lid, sized for standard drink cans and often modeled with a small tab or lip so it can be pulled off by hand. A second group adds function: openers shaped into the rim, sliding or hinged shutters, and covers that sit over the drinking surface rather than the whole can. There are also wider covers intended for food tins and larger containers, which differ mainly in diameter and in how tightly they grip the rim.

Before printing, read the author's page for the can diameter the lid was drawn around, the wall thickness and the clearance left for the rim, since a small difference decides whether the part snaps on or falls off. Check how many parts the model has and whether they are meant to be assembled after printing, and look at the listed material and settings, because a slightly flexible filament usually tolerates bending better than a stiff one. Photos of real prints on the model page show how the lid actually sits on a can.

To widen the results, try related terms such as can cap, can cover, beverage lid, soda lid or tin cover, and combine them with words like snap fit, hinged or sliding. Searching by container type, for example drink can, food tin or canister, brings up different diameters, and browsing the kitchen and household categories often reveals lids filed under general container accessories rather than under cans.

FAQ

Preguntas frecuentes

What do I need to measure before printing a can lid?
Measure the outer diameter of the can rim and the height of the rim lip. Model pages usually state the can size they were drawn for, so compare that with your own measurement before starting a print.
Which filament works for a lid that snaps onto a can?
A filament with some flexibility handles repeated snapping and bending better than a very rigid one. The author's page often names a material and settings, which is the safest starting point.
Do these lids need supports?
Many are flat or shallow and print without them, while models with overhangs, sliding channels or hinges may need them. The print orientation and any support advice are usually described on the model page.
Can a printed lid be used on a food tin as well as a drink can?
Only if the diameters match. Covers for food tins are usually wider than those for drink cans, so check the stated size rather than assuming one lid fits both.
Relacionado
Cocina

Jar Lid 3D Models: Mason Jar Lids and Holders

69422 modelos
Cocina

3D Models of Jars and Lidded Containers for 3D Printing

100176 modelos
Cocina

Coffee Jar 3D Models: Lids, Adapters and Holders

45829 modelos
Cocina

3D Models for Bulk Storage Cans and Lids

266231 modelos
Cocina

Honey Jar 3D Models: STL Pots, Lids and Traps

15889 modelos
Vehículos

3D Models for Car Can Holders and Interior Prints

29232 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías