Hogar

3D Models for 10x15 Photo Frames and STL Holders

This collection gathers 3D models built around the 10x15 cm (4x6 inch) photo format: frames, portrait mats, lithophane holders, plus a few desk stands and organizers. It helps when you need a printed frame for one specific photo size instead of a generic shape. Most files are flat or box-shaped parts, though the details differ from model to model. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 3 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 4602 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 4602 modelos
Sobre la categoría

«3D Models for 10x15 Photo Frames and STL Holders»

The frames differ mainly in how the photo is held. Some are single-piece frames with a front lip, others come as a frame plus a separate back panel or a fold-out stand. Portrait versions with a mat opening are common, and lithophane holders keep a thin printed panel upright so light passes through it. Desk stands and small organizers show up in the same results because they share a similar footprint or the same flat-print approach.

Before printing, check the inner opening the author lists, since a 10x15 photo needs a window slightly smaller than the paper size. Look at wall thickness, the number of parts, and whether the model needs supports or prints flat. Read the material and settings the author notes, and look at photos of real prints to judge how the frame edge and the back panel meet.

If the results feel thin, try other names for the same object: picture frame, photo holder, 4x6 inch frame, or terms used in other languages such as porta retrato or fotolijst. Related searches include lithophane frames, wall mounts, card holders and small storage baskets. Adding the print size, orientation or material to the query usually narrows the list faster than adding a style word.

FAQ

Preguntas frecuentes

What opening size should a 10x15 frame model have?
The photo itself is 10 by 15 cm, or 4 by 6 inches. The frame window is normally a little smaller so the print rests behind a lip, so compare the inner dimensions the author gives with your actual photo.
Do these frames need supports?
Many are drawn as flat parts that print without supports. Models with overhangs, a deep recess or a separate stand may state support requirements on the model page.
Can a 10x15 frame be scaled to another size?
Yes, but scaling also changes wall thickness and the opening, so recheck the fit and adjust the material settings after resizing.
What is a lithophane frame?
It is a holder sized for a lithophane printed on a thin panel. The frame keeps that panel upright so backlight passes through the varying thickness of the print.
Relacionado
Hogar

3D-модели рамок для фото 10 на 15

269678 modelos
Vehículos

1:10 Scale 3D Models: RC Car Bodies and Chassis

468433 modelos
Búsqueda general

STL Models for Cutters, Figures and Workshop Parts

570967 modelos
Hogar

3D Models for Air Conditioner Hose Adapters

2066 modelos
Hobbies y makers

3D Models of Propellers and Blades for 3D Printing

2297 modelos
Gadgets

Realme 15 3D Models: Cases, Stands and Accessories

3610 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías