Hobbies y makers

Remo Hobby Top Deck and SMAX Parts: 3D Models

This collection covers STL files tied to Remo Hobby top decks and the parts around them: chassis arms, body towers, transmitter holders, small RC boats and workshop stands. It helps when a stock part breaks or when you want to adapt a body or a holder to your own setup. Because the files are meant for 3D printing, scale, wall thickness and orientation decide how the result behaves on the car. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 3 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 4783 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 4783 modelos
Sobre la categoría

«Remo Hobby Top Deck and SMAX Parts: 3D Models»

The parts fall into a few groups that behave differently. Structural pieces such as arms, spur covers and body towers carry loads and are usually printed solid, while top decks and body mounts are thin plates where hole spacing matters more than bulk. Holders for transmitters and spools are simple brackets that only need to grip and stay flat. Boat hulls and airboat bodies are a separate case: they are large, often printed in sections and joined afterwards.

Before slicing, read what the author states on the model page. Check the overall dimensions and the distance between mounting holes against the part on your car, count the separate pieces and how they join, and look at whether supports or a particular orientation are mentioned. The material and settings listed by the author, together with photos of real prints, tell you more than the render does.

If a search returns little, widen the wording rather than the topic. Top deck, upper deck, body tower and shock tower are often used for the same plate, and body mount, body post and body clip cover similar hardware. For accessories, try handset holder, transmitter stand or radio holder, and for filament, spool holder or filament rack. Boat files appear under airboat, jet boat and rescue boat as well.

A printed replacement rarely matches a moulded part exactly. Measure the original, decide which dimensions are critical and which can be adjusted in the slicer, and test the fit on the bench before the part goes back on the chassis.

FAQ

Preguntas frecuentes

What is a top deck on an RC car?
It is the upper plate that links the front and rear of the chassis and often carries the body tower or shock mounts. On many models it is a separate part, so it can be replaced or reprinted on its own.
How do I find a part that matches my chassis?
Compare the mounting hole spacing, the overall length and the thickness with the part currently on your car. The dimensions and photos on the author's model page are the main reference before you slice.
Which material should I use for these parts?
Authors usually state the material and settings they used. Parts that take impacts are commonly printed in a filament with some flexibility, while flat plates and brackets are often printed in a stiffer one.
Do printed RC parts need supports?
It depends on how the model is oriented. Check the author's notes and photos for the orientation and support advice, then confirm it in your slicer preview before printing.
Relacionado
Hobbies y makers

3D Models for 1/16 RC Upper Deck Parts

1360 modelos
Hobbies y makers

RC Upper Deck 3D Models and STL Files

9634 modelos
Hobbies y makers

3D Models for Remo Hobby Wheels and RC Parts

2869 modelos
Hobbies y makers

Remo Hobby RC Parts: 3D Models and STL Files

4616 modelos
Hobbies y makers

3D Printing Files for RC Car Spares and Upgrades

86668 modelos
Hobbies y makers

Remo Hobby SMAX 3D printing models and parts

1493 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías