Medicina

3D Models for Dental Floss Holders and Cases

This collection gathers 3D models built around dental floss: holders, reusable picks, dispensers and small cases. Most of them are compact parts that fit a bathroom shelf or a travel bag, which makes them a practical subject for 3D printing. The files come from several platforms, so the level of detail in the descriptions varies. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 2057 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 2057 modelos
Sobre la categoría

«3D Models for Dental Floss Holders and Cases»

The models fall into a few groups. Holders keep a length of floss under tension or angle it toward the back teeth, and they differ mainly in how the thread is routed and replaced. Reusable picks and sticks are printed as one piece or as a small kit, while dispensers and boxes hold a stack of picks or a spool. A separate group covers stands and brackets for electric water flossers, and some cases are generic enough to store jewelry, screws or pills as well.

When choosing a file, look at the thread path first: sharp internal corners and thin slots are where a printed holder tends to fail. Check the number of parts and whether they snap, screw or slide together, since that decides how much post-processing you need. Read the material and settings the author lists, and look at photos of real prints to judge wall thickness and surface finish. For parts that stay wet, many makers prefer PETG or ABS over PLA, and a smaller layer height helps where the floss runs.

Search results widen quickly if you try related terms. Besides "floss holder", people use "flosser", "floss pick", "interdental", "dispenser", "travel case" and "hygiene kit". Combining a term with a shape or use, such as angled, foldable, wall-mounted or travel, brings up different designs. If you want a matching set, look at bathroom organizer and toothbrush holder topics, where the same styling often appears.

FAQ

Preguntas frecuentes

What should I check before printing a floss holder?
Look at how the floss is threaded and tensioned, how many parts are involved, and whether the author shows the layer height and material used. Thin slots and sharp bends are the places that usually need attention.
Which material works for parts that stay in a bathroom?
PLA is easy to print but softens in heat and can absorb moisture over time. PETG and ABS are common choices for wet environments; the author's page usually states what the model was designed around.
Do these models need supports?
It depends on the shape. Flat holders and boxes often print without them, while angled arms, clips and overhanging slots may need supports or a reoriented print. Check the model page for the orientation the author used.
Can I scale a floss holder to fit a different thread or pick?
Scaling changes slot widths and clearances, so a small adjustment may be enough for a thicker pick, but a large one can make the mechanism too loose or too tight. Measure the part you want to fit before changing the scale.
Relacionado
Hogar

3D Models for Dental Care: STL Holders and Boxes

8614 modelos
Herramientas y equipos

3D Models for Thread and Spool Holders

12379 modelos
Medicina

3D Models for Dental Prosthesis and STL Files

3379 modelos
Hogar

3D Models for Thread Bobbins and Spool Storage

22736 modelos
Medicina

3D Models for Toothbrush Holders and Dental Items

3302 modelos
Hogar

Toothbrush Holders and Cases: 3D Models to Print

16227 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías