Véhicules

3D Models for Air Intake Parts and Adapters

This collection gathers 3D-printable parts built around air intake systems: adapters, housings, velocity stacks, ducting and covers. The models range from engine-bay components to small intake pieces for RC cars and heater units. Each listing links to a source page, so you can compare dimensions before sending anything to a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 3 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 6104 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 6104 modèles
À propos de la catégorie

«3D Models for Air Intake Parts and Adapters»

The set splits into a few practical groups. Car-related files cover intake adapters, airbox modifications and blockoff plates, often shaped around a specific engine bay layout. Motorcycle entries tend toward velocity stacks and intake runners, while RC and small-engine files use compact ducts and funnels. A separate group handles airflow covers and connectors for heaters, humidifiers and room ventilation, where the part is a cover or a transition piece rather than a performance component.

When choosing a file, start with the mounting interface: bolt spacing, flange thickness, inner and outer diameter, and overall length. Check how many separate parts the model contains and whether the author expects glue, screws or a gasket between them. Look at the material and print settings the author lists, since parts near an engine bay see more heat than a ventilation cover. Photos of real prints show how the surfaces, threads and fit turned out.

Searching works better with several phrasings. Try cold air intake, airbox adapter, filter adapter, intake duct, velocity stack, MAF housing or blockoff plate, and add the engine or vehicle variant if you know it. Related terms such as engine bay, throttle body, snorkel, heater duct or vent cover can surface parts filed under different names. If a result is close but not exact, check the author's other uploads, since intake parts are often published as a small family of variants.

FAQ

Questions fréquentes

What measurements should I check before printing an intake adapter?
Confirm the flange bolt spacing, the inner and outer diameter of both ends, the wall thickness and the total length. Compare these against the part you are replacing or joining, and note whether the model expects a gasket or O-ring.
Which filament works for intake parts?
It depends on where the part sits. Ventilation covers and RC ducts stay cool, while engine-bay parts see heat, so read the material and settings the author lists on the model page and match them to your conditions.
Why are intake models split into several parts?
Print volume, overhangs and assembly needs often decide this. Multi-part designs can avoid long unsupported spans and let you orient each piece for strength, but they add joints that must line up.
How do I find a version for my specific engine or vehicle?
Search the intake term plus the engine code, model year or vehicle variant, and try synonyms such as airbox, filter adapter or intake runner. If nothing matches exactly, look at similar adapters and check whether the mounting dimensions can be adjusted in the file.
Voir aussi
Véhicules

Air Intake 3D Models and STL Files to Print

37470 modèles
Véhicules

Subaru Air Intake 3D Models and STL Files

34417 modèles
Véhicules

Air Intake Moto 3D Models and STL Files

10008 modèles
Véhicules

3D Models for Air Intakes: Scooter, Car and Fan Parts

33397 modèles
Véhicules

Window Air Intake and Vent STL Models

2515 modèles
Véhicules

Window Air Intake Adapters: 3D Models and STL Files

2593 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories