Véhicules

Car Clips and Screw-Mount STL Models for 3D Printing

This collection gathers STL files for clips that attach with a screw: cable organizers, panel and trim fasteners, pipe and hose clamps, and small holders for the car interior. It also covers body clips used on RC car shells. The range is useful when you need a small replacement part for 3D printing rather than a whole assembly. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 310900 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 310900 modèles
À propos de la catégorie

«Car Clips and Screw-Mount STL Models for 3D Printing»

The models fall into a few groups. Cable clips and organizers are usually simple loops or saddles with a screw hole, sometimes offered in several sizes or parametric variations. Trim, panel and shelf clips tend to have a threaded section or a snap geometry that matches a specific mounting point. Interior holders, such as clips for sunglasses, cards or sun visors, are shaped around the object they carry. RC body clips sit in a separate group, since they are sized for a shell and a pin rather than for a screw.

When choosing a file, look at the dimensions first: hole diameter, clip opening, overall length and the screw size the author lists. Check how many parts are involved and whether they are meant to be glued or screwed together. Read the print orientation and whether supports are needed, since a clip printed flat can delaminate along the layer lines when it flexes. The material and settings on the model page matter too, because a thin clip behaves differently in a stiff filament than in a flexible one. Photos of real prints show how the part sits in place.

To narrow the search, try synonyms and related terms: cable clamp, wire holder, trim fastener, panel retainer, pipe saddle, hose clamp, body pin clip. Adding a size or a use case, such as a diameter in millimeters or the place in the car, brings more precise results. You can also search by the object being held, for example card holder or visor hook, and by the mounting method, such as screw-mount or threaded.

FAQ

Questions fréquentes

What do I need to measure before printing a screw-mount clip?
Measure the screw diameter and the thickness of the part the clip grips, then compare them with the dimensions on the model page. The clip opening and the hole size are the two values that decide whether the part fits.
Which filament works for clips that flex?
Clips that bend repeatedly are often printed in a filament with some flexibility, while rigid parts can use a stiffer one. The author's page usually names a material and settings, so start from that and adjust for your printer.
Why do printed clips break along the layers?
Layer lines are the weak direction, so a clip printed flat can split when it is opened. Rotating the model so the stress runs across the layers, or using a more flexible material, is a common way to reduce this.
Can I adapt a clip to a different screw size?
Parametric files let you change the hole and the clip opening before exporting an STL. For fixed models, scaling the part changes every dimension, so check that the screw hole still matches.
Voir aussi
Véhicules

Car Clip and Holder 3D Models for Printing

278835 modèles
Véhicules

Toyota Car Clips: 3D Models and STL Files

13092 modèles
Véhicules

Honda Car Clips: 3D Models and STL Files to Print

286736 modèles
Véhicules

Opel and Vauxhall Car Clips: 3D Models and STL Files

12390 modèles
Véhicules

3D Models of Car Trim Clips for Mitsubishi

271598 modèles
Véhicules

Subaru Car Clips: 3D Models and STL Files to Print

259931 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories