Outils et équipement

3D Models for Pump Sensor Mounts and Holders

The collection gathers STL files for holders, mounts and fittings that connect sensors to pumps and water systems. You will find parts for sump pits, tanks, watering lines and dispenser mechanisms. It helps when you need to adapt a sensor to an existing pump or container. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 1797 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1797 modèles
À propos de la catégorie

«3D Models for Pump Sensor Mounts and Holders»

Common groups include brackets that hold a water level sensor at a set height, mounts for leak sensors near a sump pit, and fittings that pass a sensor cable through a tank wall. Some designs focus on garden watering or hydroponic setups, while others cover soap or liquid dispensers. The differences are mainly in the mounting surface, the sensor body shape and the way the cable is routed.

When choosing a model, check the sensor dimensions and the pump or tank opening it must fit, since a holder is only useful if the geometry matches. Look at the number of parts, how they join, and whether the author notes supports or particular print orientation. Material and settings matter too: parts exposed to water or sunlight often need a different filament and wall thickness than dry indoor mounts.

To narrow results, try terms such as level sensor bracket, float switch mount, sump pit holder, water leak sensor case, or cable gland fitting. Related searches include irrigation controller, hydroponic reservoir, aquarium top-off, and pump housing. Combining the sensor type with the place it is used usually gives a shorter list than a single broad word.

FAQ

Questions fréquentes

What should I measure before printing a pump sensor holder?
Measure the sensor body, the cable exit and the opening or wall where the holder will sit. Also note the height at which the sensor must sit to read the water level.
Do these models include the sensor itself?
No, the collection is about printed parts that hold or route sensors. The electronic sensor and pump are separate items.
Can I use a holder for a different pump than the one shown?
Only if the mounting points and sensor dimensions match your setup. Check the author's notes and photos before printing.
How do I find a model for a specific sensor shape?
Search by the sensor type, such as float, ultrasonic or leak sensor, and add the mounting place. Terms like bracket, mount, holder or case can return different results.
Voir aussi
Objets

3D Models for Pumps and Pump Accessories

10760 modèles
Outils et équipement

Pump Adapter 3D Models and STL Files

91578 modèles
Outils et équipement

Pump Adapter STL Models for 3D Printing

77422 modèles
Outils et équipement

Pump Gear 3D Models: STL Gear Pumps and Drives

2580 modèles
Outils et équipement

Pump Impeller 3D Models and STL Files

14892 modèles
Outils et équipement

Air Pump 3D Models: Adapters, Holders, Nozzles

46107 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories