Sport et fitness

Snowboard Holders: 3D Printing Models for Wall and Car

This collection gathers 3D models that hold a snowboard in place: wall mounts, magnetic racks for vehicles, brackets and parts that also carry boots or a helmet. Most files are meant for home 3D printing, so the shape, thickness and screw holes depend on the printer and the wall you have. It helps you compare several mounting ideas before you commit to one. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 550510 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 550510 modèles
À propos de la catégorie

«Snowboard Holders: 3D Printing Models for Wall and Car»

The models fall into a few groups. Wall holders keep the board flat against a surface or standing on its edge, while magnetic versions are shaped for a car, a truck bed or a roof rack. Some designs combine storage: a board plus boots, gloves or a helmet in one piece. There are also small brackets, plates and adapters that act as the interface between the board and the surface.

When you open a model page, look at the dimensions and scale first, then at how many parts it has and whether they need assembly. Check whether the author calls for supports, which filament and settings were used, and how the holder is fixed to the wall or the vehicle. Photos of real prints show how the contact surfaces and the screw holes turned out, which matters more here than the overall shape.

If the results feel narrow, try related wording: ski rack, board mount, wall bracket, garage storage, boot holder, helmet hook, truck bed rack, roof rack adapter. Adding the surface you have in mind, such as concrete wall or metal panel, or the board type you own, narrows the list further. Searching by the part you need, like a mounting plate or a screw spacer, often brings up models that a general query misses.

FAQ

Questions fréquentes

What should I measure before printing a snowboard holder?
Measure the board width and thickness at the point where it will rest, plus the distance between the mounting holes you plan to use. Compare those numbers with the dimensions listed on the model page.
Do these holders need supports?
It depends on the geometry: overhangs, hooks and closed loops often need them. The author usually states this on the model page, along with the orientation used for printing.
Which material works for a holder that carries weight?
Authors often list the filament they used and the wall count. A stiffer filament and thicker walls are common choices for parts that stay under load, but the final decision depends on your printer and the surface you mount to.
Can I mount a holder on a car or a truck bed?
Some designs are shaped for vehicles, but the fixing method matters: screws, straps or magnets each need a different surface. Check what the author specifies before drilling or attaching anything.
Voir aussi
Objets

3D Models of Holders: STL Files for Desk and Home

1468953 modèles
Sport et fitness

Boat Holder 3D Models and STL Files for 3D Printing

9648 modèles
Sport et fitness

Fishing Rod Holder STL Models for 3D Printing

1457 modèles
Sport et fitness

Fishing Rod Holder 3D Models for Printing

575427 modèles
Sport et fitness

Bike Holders: Wall Mounts, Bottle and Tracker STL Files

476325 modèles
Sport et fitness

3D Models of Bait Holders for Fishing and Traps

537996 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories