Électronique

3D Models for Receiver Antennas and Mounts

This collection gathers STL files for receiver antennas: holders and angled mounts, protective boxes, SMA connector parts and mast brackets. It helps when an antenna has to be fixed to a frame, hull or mast instead of taped in place. Most of these parts are small and print quickly on a common 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 12432 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 12432 modèles
À propos de la catégorie

«3D Models for Receiver Antennas and Mounts»

The models fall into a few groups. Receiver antenna holders and angled mounts keep a wire or PCB antenna at a chosen angle on a frame or hull. Boxes and covers enclose the receiver itself and often leave a channel for the antenna. A separate group covers SMA connectors, caps and adapters, and another covers mast brackets and antenna elements for base or vehicle setups. The differences show up in how the antenna is fixed: a clip, a screw, a threaded connector or a slot.

Before printing, compare the dimensions the author lists with your receiver and antenna connector. Check how many parts the model has, whether they snap or bolt together, and whether the author notes supports. Material and settings matter as well: parts exposed to vibration or sunlight are often printed in a tougher filament, and thin clips may need a particular layer orientation. Photos of real prints on the model page show how the part sits in practice.

If the results are too narrow, try other words for the same thing: mount, holder, bracket, clip, stand. Adding the connector type or the band, such as SMA or 2m, shortens the list further. Related searches include FPV antenna mounts, RC receiver boxes, mast brackets and connector caps, which often turn up parts that do the same job.

FAQ

Questions fréquentes

What is the difference between an antenna holder and an antenna mount?
A holder usually grips the antenna or its cable and keeps it at an angle, while a mount fixes the whole assembly to a frame, hull or mast. Many models combine both in one part.
How do I know a printed mount will fit my receiver?
Compare the dimensions on the model page with your receiver body and connector. The connector type, hole spacing and the angle of the antenna are the details that decide whether it lines up.
Which filament is used for antenna parts on an RC model?
Authors usually list a material and settings on the model page. Parts that see vibration, impacts or direct sunlight are commonly printed in a tougher filament than standard PLA.
Can a receiver antenna mount be scaled up or down?
Scaling changes hole and thread sizes, so a scaled part may no longer take the same screw or connector. It is safer to look for a model with the dimensions you need.
Voir aussi
Électronique

3D Models for Antennas: Cases, Mounts, Parts

50264 modèles
Électronique

3D Printed Antenna Holder STL Models for FPV and RC

550371 modèles
Électronique

3D Models for Antenna Mounts and Mechanisms

12409 modèles
Électronique

Antenna Control 3D Models and STL Files

3230 modèles
Électronique

Antenna Matrix 3D Models and STL Files

11769 modèles
Électronique

144 MHz Antenna 3D Models and STL Files

12481 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories