Maison et quotidien

Door Handle 3D Models: STL Files for Doors and Cabinets

This collection gathers 3D models of door handles for room doors, cabinets, wardrobes, drawers and balcony doors, plus slip-on and parametric versions. The files are meant for 3D printing, so scale, mounting and material choice matter as much as the shape. It helps when you need a replacement part or a handle that matches an unusual hole spacing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 3 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 7189 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 7189 modèles
À propos de la catégorie

«Door Handle 3D Models: STL Files for Doors and Cabinets»

The range splits into a few practical groups. Cabinet and wardrobe handles are usually short, flat or angular pieces mounted with two screws, while drawer pulls sit on the front face of a drawer. Balcony and room door handles are longer and often replace an existing lever. Printer door handles are a separate group: they slip over the door of an enclosed machine and are shaped around a specific panel. Parametric models let you set length, hole spacing and thickness before exporting an STL.

When choosing a model, compare its mounting dimensions with the part you are replacing: screw hole spacing, handle length, and the thickness of the door or panel it sits on. Check how many parts the model has and whether the author expects glue, inserts or separate fasteners. Read the print settings the author lists, since a handle takes load and layer orientation along the pull direction matters. Photos of real prints on the model page show how the surface and the mounting area come out.

To widen the results, search for synonyms such as pull, knob, lever, latch, furniture handle or wardrobe handle, and add the surface you need, for example cabinet, drawer or balcony. Related topics include hinges, door stops, brackets and parametric customizers that generate a handle from your own measurements. If a model is close but not exact, a parametric version or a simple scale adjustment in the slicer is often the faster route than searching further.

FAQ

Questions fréquentes

How do I match a printed handle to the existing screw holes?
Measure the center-to-center distance between the holes on the door and compare it with the mounting points in the model. Many handles are parametric, so you can set that spacing before exporting the STL.
Does a door handle need supports when printed?
It depends on the orientation. Handles printed flat on the mounting face often need little or no support, while models with overhanging levers may need it under the arm. The author's notes usually state the intended orientation.
Which material works for a handle?
A rigid filament such as PLA or PETG is common for light cabinet and drawer use, while parts that take repeated pulling may be printed in a tougher material. Layer direction and wall count affect how the handle resists the pull.
Can I resize a handle model?
Yes, uniform scaling changes the overall size, but hole spacing and screw diameter scale with it, so check them again after resizing. A parametric model is usually easier to adapt than a fixed STL.
Voir aussi
Maison et quotidien

Door Handle STL Models for 3D Printing

98288 modèles
Maison et quotidien

Bird Door Handle 3D Models and STL Files

6868 modèles
Véhicules

Car Door Handle 3D Models and STL Files

238182 modèles
Véhicules

Vectra B Door Handle 3D Models and STL Files

100472 modèles
Maison et quotidien

Door Handle Storage Box 3D Models and STL Files

11792 modèles
Maison et quotidien

Door Hinge STL Models for 3D Printing

61840 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories