Maison et quotidien

Flip Holder 3D Models: STL Mounts, Stands and Hoods

This collection gathers flip holder models for 3D printing: mounts that grip a portable speaker, hoods that swing over a paper roll, small stands for cards and phones, and hinge or bracket parts. The range is wide because "flip" describes the movement rather than one object, so the same idea reappears in very different sizes. Browsing here helps you find an STL that matches the item you want to hold and the way you want it to open. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 4650 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 4650 modèles
À propos de la catégorie

«Flip Holder 3D Models: STL Mounts, Stands and Hoods»

The models fall into a few groups. Speaker holders and shelf mounts are shaped around a specific device body, while paper roll holders use a hood or arm that flips up for a quick change. Card and phone stands are usually flat, folding or rotating pieces, and flip-flop stands or bit holders use slots to keep several items upright. Hinge and sensor holders sit closer to repair work, where a bracket has to flip out of the way.

When choosing, open the author's model page and read the listed dimensions before anything else. Check how many separate parts are involved, whether they are meant to be glued, screwed or snapped together, and whether the author notes supports or a particular orientation. Material and settings matter too: a thin hood or a springy clip behaves differently in PLA than in PETG, and a mount that carries weight may need more walls. Photos of real prints show how the finished part sits against the object it holds.

To narrow the results, search by what the holder grips rather than by the word flip alone: speaker mount, roll holder, card stand, phone stand, hinge bracket, wall mount. Adding a size or a mounting method, such as screw mount, adhesive base or desk stand, cuts the list further. Related terms like swivel, folding, hinged, quick change and bracket often surface models that a single keyword misses.

If nothing matches exactly, look at models for a similar object and compare the mounting side, since that is usually the part worth adapting. Scaling a holder changes both the grip and the clearance, so keep the original proportions in mind when you adjust it in the slicer.

FAQ

Questions fréquentes

What counts as a flip holder?
It is any holder where a part flips, folds or swings — a hood over a paper roll, a hinged bracket, a folding stand or a clip that opens to release the item. The movement, not the object, defines the group.
How do I pick the right size for my device?
Compare the inner dimensions on the model page with the measurements you take yourself, including any case or cable. A small difference in width changes how firmly the holder grips.
Do these models need supports?
It depends on the shape. Flat stands and simple brackets often print without them, while overhanging hoods and curved clips may need supports or a different orientation. The author's page usually states what was used.
Which material works for a holder that flexes?
Parts that bend repeatedly are commonly printed in PETG or another tougher filament, while rigid mounts are often made in PLA. Check what the author lists and what your printer handles.
Voir aussi
Maison et quotidien

1/2 Holder 3D Models for Batteries, Spools, Sockets

18140 modèles
Gadgets

DJI Flip 3D Models: STL Accessories and Mounts

3024 modèles
Jouets et figurines

UNO Flip Card Box 3D Models and STL Files

2164 modèles
Bureau

Flip Calendar 3D Models: STL Files for Desks

6782 modèles
Gadgets

Flip Mechanism 3D Models: STL Clocks, Keys and Clips

1663 modèles
Maison et quotidien

Flip-Top Box and Clip Latch 3D Models

4133 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories