Véhicules

Ford Focus 2 Gear: STL Models for Shift and Gearbox Parts

This collection gathers STL files connected to Ford Focus 2 gear topics, from shift knobs and lever bushings to gearbox housings and gear-shaped toys. It also catches lens focus gears and adjustment rings that share the same vocabulary. The mix is useful when you are repairing or modifying a car interior and want a 3D printer to cover the small plastic pieces. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 3 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 8851 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 8851 modèles
À propos de la catégorie

«Ford Focus 2 Gear: STL Models for Shift and Gearbox Parts»

The results fall into two groups. One covers car parts for the Focus 2 and its close relatives: shift knobs, lever bushings, boot frames and gearbox housings. The other is broader gear geometry, such as lens focus gears for older lenses and gear-shaped fidget toys. Parts differ mainly in how much they carry — a knob is mostly a shell, while a bushing or linkage piece takes load and wears over time.

On the author's model page, check the stated scale and the diameter of the shaft or thread the part slides onto, since a few tenths of a millimetre decide whether it sits correctly. Look at the number of parts and whether the description mentions supports, print orientation and the material the author used. Photos of real prints show layer lines, tolerances and how the surface reads after finishing.

Search results for this topic mix languages and spellings, so try variants such as shift knob, gear lever, pomello, cambio, and the MK2 or MK2.5 marks. Related terms help as well: gearbox, linkage, bushing, boot frame, timing belt, or lens focus gear for the photographic side. If you want a printable toy rather than a car part, gear fidget and rotating gear are separate lines to follow.

FAQ

Questions fréquentes

What is the difference between a gear shift knob and a gear lever bushing?
A knob is the visible grip you hold, usually printed as one shell that slides over the lever. A bushing is a small internal part that sits in the linkage and takes movement and wear, so its wall thickness and hole diameter matter more.
Which measurements should I take before printing a shift knob?
Measure the lever shaft diameter, the depth of the shaft inside the knob, and any thread if the original screws on. Also note the height and width you want, since these decide how the knob sits in your hand and in the console.
Do gear models need supports?
It depends on the shape. Flat knobs and simple gears often print without them, while housings, boot frames and parts with overhangs usually need support. The author's notes and photos are the quickest way to see how a model was oriented.
Can I use the same search terms for a Focus MK2.5?
Partly. Lever and bushing terms carry over between the marks, but body and trim parts often differ. Add the exact mark and year to the query, and compare the photos on the model page with the part you are replacing.
Voir aussi
Véhicules

Ford Focus 3D Models and STL Files to Print

17095 modèles
Véhicules

Ford Focus 3 STL Models for 3D Printing

1128685 modèles
Véhicules

Ford Focus 2 3D models: parts, trim and accessories

326510 modèles
Véhicules

Ford Focus Mk2 Cap and Plug STL Models

342524 modèles
Véhicules

Ford Focus 3D Models: STL Files for Printing

142108 modèles
Véhicules

Ford Focus 2 Speaker 3D Models and STL Parts

298972 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories