Outils et équipement

HSM 80.2, 90.2, 102.2 3D Models and STL Files

This collection gathers STL files tied to equipment marked HSM 80.2, 90.2 and 102.2: wall mounts and holders, gear rings, lens hoods, adapters and cases. It is useful when a small bracket, cover or ring is missing and a 3D printer can produce it faster than a spare part can be ordered. The models come from different authors, so the level of detail in the documentation varies from file to file. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 2 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 1115 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1115 modèles
À propos de la catégorie

«HSM 80.2, 90.2, 102.2 3D Models and STL Files»

The entries fall into a few groups. Mounts and docks are usually flat-backed brackets with screw holes for a wall or a panel, while holders and cases are box-shaped and may close with a lid or a clip. Gear rings and drive gears are round parts with teeth or a friction surface, and lens accessories such as hoods or collars are shaped around a barrel diameter. RC and scale parts sit apart from the rest: they are larger assemblies, often split into several pieces.

Before printing, open the author's page and read what is written there. Check the stated dimensions and hole spacing against the unit you have, count the separate parts and see whether they are meant to be glued or screwed together. Look at whether supports are needed and where the author placed the model on the build plate, since orientation decides how a thin bracket or a toothed ring comes out. The material and settings the author lists are a starting point, and photos of real prints show how the part behaves once assembled.

If the first search gives few results, try other words for the same object: bracket, dock, cradle, base or stand for mounts; drive gear, toothed ring or friction ring for gears; sun shade or lens shade for hoods; coupling or reducer for adapters. Adding a diameter, a thread size or a wall thickness narrows the list. Related topics such as remote storage, lens repair or scale model chassis often lead to parts that fit the same equipment.

FAQ

Questions fréquentes

What do the numbers 80.2, 90.2 and 102.2 refer to in these titles?
They appear as equipment designations in model titles. Read the author's description to see which unit a given file was drawn for, since similar numbers can belong to different housings or generations.
Do these parts need support material?
It depends on the shape. Flat-backed mounts often print without supports, while overhangs on cases, clips or gear teeth may need them. The author's notes and the orientation shown in the preview usually answer this.
Can I scale a holder or a gear ring to fit another unit?
Scaling changes hole spacing, wall thickness and tooth geometry at the same time, so a scaled part may no longer line up. Measure the original and compare it with the dimensions listed for the model before changing the size.
Which material should I use for a wall mount?
The author often names a material and settings. For thin brackets that carry weight, stiffness matters more than surface finish, so check the listed material and layer orientation rather than picking by colour.
Voir aussi
Outils et équipement

Pignon 3D pour déchiqueteuse HSM : fichiers STL

2357 modèles
CNC et fraiseuses

HSM 80.2 3D Models: Mounts, Gears and Lens Parts

1135 modèles
Bureau

HSM 80.2 Shredder 3D Printing Models

2378 modèles
Outils et équipement

3D Models for HSM 80.2 Shredder Gears

2373 modèles
Outils et équipement

Équerres d'angle droit et pièces 90° en 3D

29300 modèles
Militaire

Modèles 3D du char T-80 à imprimer

58459 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories