Électronique

Jump Starter 3D Printing Models: Mounts and Cases

This collection gathers 3D printing models made around portable jump starters and boosters for cars. It covers wall mounts, protective cases, replacement clamps and small attachments that keep a unit in place or protect its controls. Most files are small parts, so a single spool of filament goes a long way. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 1998 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1998 modèles
À propos de la catégorie

«Jump Starter 3D Printing Models: Mounts and Cases»

The largest group is mounting hardware: brackets that hold a booster on a garage wall, in a trunk or on a shelf, often shaped around a specific housing. A second group is protective — cases, lids and covers that shield terminals, buttons or the whole unit during storage. The rest is repair and adaptation work: replacement alligator clips, cable connectors, pin covers and snap-on pieces that replace a lost or worn part.

When choosing a file, look at how the part is fixed: screw holes, adhesive pads, straps or a snap fit, and whether the author lists the exact unit dimensions it was drawn around. Check the number of parts and whether assembly needs inserts, magnets or fasteners you have to buy separately. On the printing side, read the material and settings the author lists, and look at photos of real prints to judge wall thickness and how the clamp or clip flexes.

Because these parts are tied to hardware, searching by the type of part works better than searching by the device name. Try terms such as booster holder, battery clamp, alligator clip replacement, power bank enclosure or cable connector. Related topics that often turn up the same files include car accessories, garage storage, power tool mounts and 12V electronics projects.

If a file does not match your unit, a parametric or remixable model is often easier to adjust than to redraw. Measure the body, the terminal spacing and the cable exit before printing, and test the fit on a small section first. For parts that carry current, print only the housing or the mechanical holder and keep the original metal contacts.

FAQ

Questions fréquentes

What can I print for a jump starter?
Common items are wall mounts and holders, protective cases, button or pin covers, and replacement clamps and connectors. Most are simple brackets or shells that take a few hours to print.
How do I find a mount that fits my booster?
Compare the dimensions in the model description with your unit's length, width and terminal spacing. Files drawn around a specific housing usually state the measurements or show a photo of the part fitted.
Which filament works for these parts?
It depends on where the part lives. Parts kept in a hot car are usually printed in materials with higher heat resistance, while indoor holders and covers are often made in common rigid filaments. The author's page usually lists a material and settings to start from.
Can I print the electrical contacts myself?
Printed parts are normally limited to housings, holders and covers. Metal contacts and cables that carry starting current are kept as original components, and printed pieces are used around them.
Voir aussi
Outils et équipement

STL Files for Jump Starter Clamps and Mounts

2219 modèles
Recherche générale

3D Models for Jump Starter Clips and Clothespins

2230 modèles
Gadgets

3D Models for Jump Starter Clamps and Mounts

1722 modèles
Gadgets

Jump Starter Crocodile 3D Models and STL Files

2081 modèles
Jardin

Seed Starter STL Models for 3D Printing

10092 modèles
Sport et fitness

Ski Jump 3D Models: STL Files for Printing

4882 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories