Maison et quotidien

Rack Post Caps: 3D Models and STL Files for 3D Printing

This collection gathers STL models for caps that close off, cover or finish a rack, rail or post. It covers car roof rack and roof rail caps, wall-mounted hat racks and hangers, and small end caps for tubes, screws and equipment frames. The range is useful when a small plastic part is missing, cracked or never existed, and 3D printing is the quickest way to replace it. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 2679 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 2679 modèles
À propos de la catégorie

«Rack Post Caps: 3D Models and STL Files for 3D Printing»

The models fall into a few groups that differ in what they attach to. Roof rack and roof rail caps fit an existing car part and are shaped around a specific rail profile, while wall-mounted hat racks and hangers are standalone pieces that hold objects and mount with screws or nails. End caps for tubes and screw heads are small closing pieces, and rack caps for frames or spools sit at the end of a bar or post. Some are purely decorative covers, others carry load or hide a fixing.

When choosing a model, start with the dimensions the author lists: outer and inner diameter, wall thickness, length and the spacing of screw holes. Look at how the part is oriented on the build plate and whether the author notes supports, since caps often have overhangs or recessed pockets. The material and settings on the model page tell you what the author used; parts left outside are often printed in a weather-resistant filament. Photos of real prints show how the surface and fit turned out.

To widen the search, try synonyms such as cover, plug, trim, end cap or finishing cap instead of only cap, and pair them with the part they attach to, like roof rail, crossbar, hanger, hook or tube. Related topics include wall mounts, screw covers, spool holders and automotive trim clips. If a model is close but not exact, check whether the author offers several sizes or a parametric version before looking at a different design.

FAQ

Questions fréquentes

How do I find a cap that matches my car's roof rail?
Measure the rail profile and compare it with the dimensions on the model page, including length and the position of any clip or screw. Photos of the printed part next to the rail help confirm the shape.
Which filament should I use for a cap that stays outside?
Authors usually state the material they printed with. Filaments with better UV and moisture resistance are common for outdoor parts, while indoor covers are often printed in standard PLA.
Do these caps need supports?
It depends on the shape. Flat covers print without them, while caps with deep recesses or overhanging lips usually need supports or a different orientation. The model page often shows the intended direction.
How do I measure a tube or screw end cap correctly?
Measure both the inner and outer diameter of the opening and the depth you need the cap to sit. For screw covers, note the head diameter and whether the cover should sit flush or stand proud.
Voir aussi
Maison et quotidien

Remote Control Stand 3D Models and STL Files

12015 modèles
Objets

3D Models of Stands with Mounts and Holders

776103 modèles
Maison et quotidien

Tape Holder and Dispenser 3D Models to Print

7582 modèles
Véhicules

Towbar Cap 3D Models and STL Files

53053 modèles
Pièces d’imprimante

3D Models for Spool and Reel Stands

3701 modèles
Objets

Threaded Caps and Adapters: 3D Models and STL

12591 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories