Électronique

Outdoor Camera Housing STL Models for 3D Printing

This collection gathers 3D models for outdoor camera housings: enclosures for single-board computer cameras, covers and sun hoods for branded security cameras, and mounts shaped like everyday objects. Each listing is a starting point for 3D printing, and the useful part is comparing how a design handles the lens opening, cable entry and rain. The set helps you narrow down a housing that fits the camera you already own. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 8 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 190831 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 190831 modèles
À propos de la catégorie

«Outdoor Camera Housing STL Models for 3D Printing»

The models fall into a few groups. Enclosures for single-board computers hold a camera module and often a small board inside one box, while covers and hoods for branded outdoor cameras are usually a shell that fits over the camera body and shields the lens from sun and rain. Some designs take the shape of a birdhouse or another ordinary object, and modular boxes leave a rectangular opening for a front panel or a custom plate. They differ mainly in how the camera is fixed inside, whether the lens sits behind a window or in an open cutout, and where the cable leaves the housing.

When choosing, open the author's page and read the listed dimensions before anything else: camera width and depth, distance from lens to front face, and the spacing of mounting holes. Check how many parts the model has, whether screws or inserts are used, and if the author mentions supports, orientation or a specific filament. For outdoor use, look at how the design handles water: a sloped top, an overlapping lid, a groove for a seal, a drain hole, and a cable entry that points downward. Photos of real prints show more about fit and finish than renders do.

If the results feel narrow, try other words for the same object: enclosure, case, cover, hood, visor, shield, mount or bracket. Adding the camera type, the board name, or a material such as ASA or PETG to the query often surfaces designs that a plain search misses. Related topics worth a look include birdhouse camera mounts, junction boxes, panel-mount plates and lens hoods, since these share the same problems of fixing, sealing and cable routing.

FAQ

Questions fréquentes

What material do people use for an outdoor camera housing?
Authors often list ASA, PETG or ABS for parts that stay outside, and PLA for covers in mild conditions. Check the material and settings on the model page, since wall thickness and layer direction affect how a printed shell behaves.
Do these housings need supports?
It depends on the shape. Flat-backed boxes and simple hoods often print without them, while rounded shells and deep overhangs may need supports inside the cavity. The author's notes usually say which orientation was intended.
How do I find a housing for the camera I already have?
Search with the camera type and then compare the dimensions given on each model page with the measurements of your device. Mounting hole spacing and lens position matter as much as overall size.
Can a housing be adjusted to fit a different camera?
Some designs are built from separate parts or include a blank front plate, which makes local changes easier. Look at the part count and the notes on the model page to see how the pieces join before you plan any edits.
Voir aussi
Électronique

Boîtiers pour caméra à imprimer en 3D

187522 modèles
Objets

3D Models for Car Camera Bodies and Mounts

11387 modèles
Électronique

Boîtiers 3D pour caméra thermique : modèles STL à imprimer

4664 modèles
Électronique

Boîtier de caméra de surveillance à imprimer en 3D

156090 modèles
Gadgets

3D Models for 360 Camera Housings and Mounts

185375 modèles
Électronique

Boîtier pour caméra thermique FPV à imprimer en 3D

182633 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories