Outils et équipement

5.8 GHz Antenna and Device Mounts: STL Files to Print

This collection gathers 3D models for mounting things: antenna brackets for 5.8 GHz video gear, top mounts for printer add-ons, wall holders for tools and lamps, and rail or rack adapters for electronics. Each listing is a starting point for 3D printing, not a finished product. It helps when you need a bracket shaped around a specific device instead of a generic one. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 8265 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 8265 modèles
À propos de la catégorie

«5.8 GHz Antenna and Device Mounts: STL Files to Print»

The models differ mostly by what they hold and how they attach. Antenna mounts are usually small brackets with a clamp or a slot, while printer add-on mounts sit on a frame or a top rail and often include a plate, a hook or a screw boss. Wall holders and rail adapters are flatter and rely on screws, adhesive pads or a sliding fit. Some files are a single piece, others are split into a base and an insert so the angle can be changed.

Before printing, open the author's page and read the details: hole spacing and screw size, the thickness of the part that carries the load, and whether the model was drawn for a specific device footprint. Check the orientation the author used, since a bracket printed flat can be weak along the layer lines. Look at the material and settings listed, and at photos of real prints, to judge how the part behaves under vibration or weight.

If the first search gives few results, try other words for the same idea: bracket, holder, clip, cradle, dock, adapter, plate, caddy. Adding the device type or the mounting surface narrows it further, for example a rail, a wall, a frame tube or a panel cutout. Related topics such as camera accessories, desk organization or printer upgrades often contain mounts that fit the same job.

FAQ

Questions fréquentes

What does 5.8 mean in these mount listings?
It usually refers to the 5.8 GHz band used by FPV video transmitters and antennas. A mount with that label is shaped around an antenna or receiver of that type, so check the connector and body dimensions on the model page.
How do I know a mount will fit my device?
Compare the dimensions and hole spacing in the listing with your own measurements. The author's page often states the screw size, the thickness of the clamped part and the angle of the bracket.
Which material works for a mount under load?
It depends on the part: small brackets are often printed in a stiff filament, while parts that flex or clip are printed in a tougher one. The listing usually names the material and settings the author used.
Do these mounts need supports?
Some do, especially those with overhangs or screw holes running sideways. The model page or the print profile shows the orientation and whether supports were used, so you can plan the same setup.
Voir aussi
Outils et équipement

3D Models of Fastenings and Mounts for 3D Printing

728982 modèles
Outils et équipement

Drone Mount 3D Models: STL Brackets and Holders

12670 modèles
Outils et équipement

Tool Mounting 3D Models: STL Holders and Clips

419233 modèles
Électronique

Speaker Mounts: 3D Models and STL Files to Print

216407 modèles
Outils et équipement

PTFE and Fog Light Mounts: 3D Models to Print

200051 modèles
Gadgets

Car Mount 3D Models: Phone, Tablet and Holder STL Files

24292 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories