Objets

Tube Clamps and Holders: STL Files for 3D Printing

This collection gathers 3D models for fastening tubes, cables and PTFE lines — clips, clamps, collets and brackets. Some are small snap-on parts, others are wall or frame mounts that take a screw. All of them are made for 3D printing, and the right pick depends on the tube diameter and on where the line has to run. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 213338 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 213338 modèles
À propos de la catégorie

«Tube Clamps and Holders: STL Files for 3D Printing»

PTFE and Bowden clips are usually small, thin parts that grip a line and keep it in place; some are articulated or hold several lines at once. Cable and pipe clamps come in larger sizes and often have an interlocking or screw-down base. Automotive fastenings and rail end sockets form a third group: they replace or support an original mount and are shaped around a particular body or frame point.

Before printing, compare the inner diameter given on the model page with your tube or cable, because a small difference changes how firmly the part grips. Look at the number of parts and whether assembly is needed, whether supports are required, and which material and settings the author lists. Photos of real prints show how the clip closes and how thick its walls are.

If a search returns little, try synonyms: clamp, clip, holder, bracket, collet, retainer, guide. Related topics help as well — cable management, filament routing, spool holders, or the device the tube belongs to. Adding a diameter in millimetres or the name of the machine narrows the list further.

FAQ

Questions fréquentes

How do I choose the right size for a tube clip?
Measure the outer diameter of the tube and compare it with the dimension on the model page. Wall thickness and material stiffness also affect how tightly the clip holds.
Do these models need supports?
It depends on the shape. Flat clips often print without them, while brackets with overhangs may need them, and the author's page usually says which case applies.
Can these parts hold cables as well as tubes?
Many clamps and clips are drawn for round lines in general, so a cable of the same diameter can go into the same holder. Check the diameter range the author lists.
Which material do authors list for tube fastenings?
PLA appears often for indoor holders, while PETG or ABS are named where the part bends or sits near heat. The model page usually states the material the author used.
Voir aussi
Pièces d’imprimante

Tube Holder 3D Models and STL Files

484788 modèles
Objets

1/4 Tube Fittings: 3D Models for Threads and Barbs

336590 modèles
Objets

Pipe Fitting STL Models for 3D Printing

20046 modèles
Objets

Tube Connection 3D Models: STL Fittings and Adapters

5045 modèles
Pièces d’imprimante

3D printing tube clips: STL models for PTFE and Bowden lines

78638 modèles
Pièces d’imprimante

Tube Splitter STL Models for 3D Printing

1390 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories