Sport et fitness

Lowrance Elite Mounts and Sun Shades: STL Files

This collection gathers 3D-printable parts built around Lowrance Elite fishfinder displays: sun hoods, gimbal brackets, rail and pipe mounts, desk stands and small adapters. Most of it is practical boat and bench hardware rather than decorative models. It is useful when a factory bracket no longer matches your setup and you want to print a replacement or an extra on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 1150 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1150 modèles
À propos de la catégorie

«Lowrance Elite Mounts and Sun Shades: STL Files»

The models fall into a few clear groups. Sun hoods and visors wrap around the screen to cut glare, and they differ mainly in how they clip on and how much of the display they cover. Brackets and gimbal mounts hold the unit on a rail, pipe or helm, while table and desk stands keep it upright indoors. Smaller pieces such as mounting tabs, hole adapters and extension arms solve one specific problem each.

Before printing, compare the hole spacing, screw size and overall depth with your own unit, since several display generations share a name but not a housing. Check the wall thickness of arms and clamps, the direction the part is oriented on the plate, and whether the author lists supports, infill or a particular filament. Parts that sit in sunlight or spray benefit from a material the author recommends for outdoor use, and threaded or sliding joints often need clearance testing on a small test piece first.

If the results look thin, try related wording: fishfinder, chartplotter, sonar display, sounder console, gimbal bracket, sun visor, dash mount or rail clamp. Adding the mounting context helps too, such as kayak rigging, boat dash panel or helm station. Related searches for transducer arms, cable clips and tackle-pod inserts often lead to parts that pair with the same setup.

FAQ

Questions fréquentes

What do I need to measure before printing a mount for a fishfinder display?
Note the distance between the mounting holes, the screw diameter and the thickness of the housing at the bracket. Also check how far the unit has to sit from the surface so cables and connectors still clear it.
Are sun hoods for these displays printed as one piece?
Some are single-piece shells, others come as a frame plus side panels that you glue or bolt together. The author's page usually shows the part count and whether the hood needs supports.
Which filament works for parts kept on a boat?
Look at what the author used and how the part is loaded. Parts exposed to sun and spray are usually printed in a weather-resistant filament, while indoor stands can use standard material.
Can I adapt a bracket made for one display size to another?
Sometimes, if the hole pattern is close and there is enough material to drill or file. Otherwise search for an adapter or extension piece, or scale the model only if the mounting geometry allows it.
Voir aussi
Outils et équipement

Lowrance Elite 9 FS Mounts: 3D Printing Files

1417 modèles
Sport et fitness

Lowrance Sonar 3D Printing Models: Mounts and Sunshades

1119 modèles
Sport et fitness

Lowrance 9 fish finder accessories 3D models

22750 modèles
Électronique

Lowrance 7 Fish Finder Accessories: 3D Models

1420 modèles
Outils et équipement

Lowrance 3D Models: Mounts, Visors and Covers

486 modèles
Sport et fitness

Lowrance Transducer Mounts: 3D Models and STL Files

672 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories