Électronique

Weather Station and Sensor Shield 3D Models

This collection gathers 3D models related to weather measurement: radiation shields, anemometers, rain gauges, probe holders and full station housings. It is useful if you build or repair your own instruments and want parts that a 3D printer can produce. The STL files vary widely in size and complexity, from small sensor caps to multi-part station bodies. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 1919 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1919 modèles
À propos de la catégorie

«Weather Station and Sensor Shield 3D Models»

The models fall into a few groups. Radiation shields and sensor housings protect temperature and humidity sensors from direct sun and rain, and they often consist of stacked plates or louvered rings. Anemometers cover mechanical wind indicators with rotating cups or blades as well as dual-shaft designs that report speed and direction. Alongside these you will find rain gauge bodies, probe holders for outdoor sensors, and complete station enclosures that combine several of these parts.

When choosing a model, read the author's page rather than the thumbnail. Check the stated dimensions and scale, how many parts need to be printed and how they join, and whether the geometry needs supports. Look at the material and settings the author lists, since outdoor parts are usually printed in UV- and moisture-resistant filaments, and examine photos of real prints to judge surface quality and fit. For moving parts such as anemometer rotors, note the axle, bearing or bushing the design expects.

If the results are too narrow, try related terms. Searches for radiation shield, Stevenson screen, sensor housing or solar shield return similar enclosures, while wind vane, cup anemometer, pitot tube and weather mast cover other instruments. Rain gauge, pluviometer and tipping bucket describe the same measurement, and terms like ESP32 weather station or sensor node point to electronics-oriented builds. Combining a measurement word with a mounting word, such as probe holder or mast bracket, often surfaces parts that a single keyword misses.

FAQ

Questions fréquentes

What is a radiation shield used for in a weather station?
It houses a temperature or humidity sensor and blocks direct sunlight and rain while letting air pass through, so the sensor reads closer to the actual air conditions. Most designs use stacked plates or louvered rings.
Do anemometer models include the moving parts?
Some designs include rotors, cups or vanes as separate printable parts, and others expect a bearing, axle or magnet you supply. The author's page usually states which hardware is needed.
Which filament works for outdoor weather parts?
Authors often list ASA, PETG or another weather-resistant filament for parts that stay outside. Check the recommended material on the model page and consider how much sun and moisture the part will see.
Can I scale a weather station model to fit my own sensors?
Scaling changes wall thickness and the fit of joints, so it works only within limits. If the sensor diameter differs, look for a parametric version or a model designed around that sensor size.
Voir aussi
Jouets et figurines

3D Models for Math Learning and Probe Mounts

1388 modèles
Pièces d’imprimante

Tornado Probe 3D Models and STL Files

18001 modèles
Loisirs et makers

Cone-Shaped 3D Models: STL Files for Printing

2045 modèles
Électronique

STL Plugs, Caps and Covers for 3D Printing

2147 modèles
Électronique

FPV Drone Frames: 3D Printing STL Models

13231 modèles
Électronique

7-Inch Display Wall Mount Cases: STL Files

1463 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories