Outils et équipement

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

This collection gathers 3D models of pipe clamps: snap-on holders, parametric designs you can resize, and fixed-diameter versions for tubes and conduit. Most files are made for 3D printing, and the range runs from small cable routing to larger workshop clamps. It helps when you already have a pipe or conduit and need a holder that matches it. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 84869 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 84869 modèles
À propos de la catégorie

«Pipe Clamp 3D Models: STL Files for Tubes and Conduit»

The models fall into a few families. Snap-on clamps close around a tube and often add a locking lid or a slot for a zip tie, while parametric versions are built to be regenerated at a new diameter. Fixed-size clamps are drawn for one nominal pipe or conduit size, and double U-shaped or rack variants hold several runs or support a pipe along a bench.

Before printing, read the author's page for the diameter range, wall thickness and the clearance built into the snap fit. Check how many parts a clamp has and whether it needs screws, inserts or a lid, and look at the material and layer settings the author lists. Photos of real prints show how the jaws close and where your own 3D printer may need a slightly different tolerance.

If a search returns too much, narrow it with the diameter or the trade name you use: tube holder, conduit clip, cable saddle, pipe bracket. Related words such as stackable, quick release, interlocking or wall mount describe the same idea from different angles. Searching both metric and imperial sizes helps, since models are often labelled in one and used in the other.

A clamp that grips well usually has a small gap between the two halves, so the pipe slides in without cracking the part. Where a clamp carries weight, thicker walls and more perimeters matter more than infill percentage. Test a short section of the model first if the fit is critical, then print the full clamp.

FAQ

Questions fréquentes

What pipe sizes appear in this collection?
Models are labelled by diameter or nominal size, from small cable and conduit sizes up to larger workshop pipes. Some files are parametric and cover a whole range, so check the title and the author's notes.
Do these clamps need supports?
It depends on the design; many are drawn to print flat or in two halves that bolt together. The model page usually states the orientation the author used.
How do I make a clamp fit my exact pipe?
Parametric files can be regenerated at the diameter you need, and fixed models can be scaled in the slicer. Measure the outer diameter of the pipe rather than the nominal size, and test a short section first.
Which filament should I use for a pipe clamp?
The author's page often names a filament and settings; the choice depends on the load and where the clamp sits. Parts under strain generally benefit from more perimeters and a tougher filament.
Voir aussi
Outils et équipement

Pipe Clamp 90 Degree: 3D Models and STL Files

4961 modèles
Outils et équipement

Pipe Clamp 3D Models for Drain and PVC Pipes

5223 modèles
Outils et équipement

3D Printable Clamps: STL Models for Shop and Desk

172350 modèles
Maison et quotidien

Vertical Pipe Clamp Mount Hook: 3D Models and STL Files

4451 modèles
Outils et équipement

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351 modèles
Maison et quotidien

Pipe Holder 3D Models and STL Files to Browse

6771 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories