Véhicules

Car Cup Holder 3D Models and STL Files

This collection gathers 3D printing files for the car cabin: cup holder adapters and inserts, decorative valve caps, mounts for tablets and phones, scale model cars and print-in-place mechanisms. It gives you a starting point for an STL file when something in the interior needs a better fit or a small replacement part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 43 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 11772 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 11772 modèles
À propos de la catégorie

«Car Cup Holder 3D Models and STL Files»

The models here fall into a few groups that behave differently on a 3D printer. Cup holder adapters and inserts are usually simple round or stepped shapes meant to bridge one diameter to another, so they print as a single body with little or no support. Valve caps are small, often shaped as a head or a character, and are printed at a tiny scale where layer height matters more than strength. Mounts for tablets and phones combine a bracket with a joint or a clamp, which means several parts and some assembly. Scale model cars and print-in-place RC bodies sit at the other end: many pieces, thin panels and long print times.

Before printing, open the author's model page and read what is listed there. Check the outer and inner dimensions against the cup well or the item you want to hold, since a difference of a millimetre or two decides whether the part sits firmly or rattles. Look at the number of parts, whether supports are needed, and the material and settings the author names, especially for anything that stays in a hot cabin. Photos of real prints are the most useful signal, because they show layer lines, warping and how the joints actually move.

If the first results do not match what you need, change the wording rather than scrolling further. Searches for cup holder adapter, drink holder insert, console organizer or can holder often lead to the same kind of file from different angles, and phone mount, tablet bracket or dashboard holder cover the mounting side of the topic. For the decorative parts, valve cap, tire valve cover or wheel accessory bring up the small snap-on pieces. Related directions include car interior accessories, model car kits and print-in-place toys, which is where the mechanical designs in this collection overlap.

FAQ

Questions fréquentes

How do I pick a cup holder model that fits my car?
Measure the diameter and depth of the existing cup well and the base of the cup or bottle you want to hold, then compare those figures with the dimensions the author lists. A tapered or stepped adapter covers more than one size, but the numbers on the model page are what you check first.
Which material should I use for parts that stay in a car?
Interior heat and sunlight affect printed parts over time, so read the material and settings the author recommends on the model page instead of assuming a default. Many makers note which filament they used and how thick they printed the walls.
Can I scale a cup holder or mount up or down?
Scaling changes wall thickness, joint clearance and the fit of any snap or thread, so it works better for plain shapes than for parts with moving pieces. Check the listed dimensions before scaling and adjust only if the difference is small.
What should I look at on a model page before printing?
Look at the size and scale, the number of separate parts and how they assemble, whether supports are needed, and any photos of finished prints. Those four points tell you more about the print than the preview image alone.
Voir aussi
Véhicules

3D Models for Car Interiors and Accessories

320041 modèles
Véhicules

3D Printing Car Organizers: STL Models for Storage

14128 modèles
Véhicules

Car Speaker Adapters and Pods: 3D Printing STL Files

5562 modèles
Véhicules

Ford 3D Models: Cars, Trucks and Parts in STL

13841 modèles
Véhicules

Toyota 3D Models: STL Files for 3D Printing

6300 modèles
Véhicules

Car Bumper 3D Models: STL Files for RC and Full-Size

12669 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories