Électronique

Speaker Grill STL Models for 3D Printing

This collection gathers 3D-printable speaker grills and covers, from simple round mesh discs to panels drawn around a particular dashboard or door. Most files are built around a driver size, a hole pattern or a mounting flange, so the shape of the collection follows what people actually need to replace or build. It is useful when a stock grill is missing, cracked or too plain for the build you have in mind, and you want an STL you can adjust in a slicer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 11313 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 11313 modèles
À propos de la catégorie

«Speaker Grill STL Models for 3D Printing»

The models split roughly into a few groups. Round grills with a hex or mesh pattern are the most general and are usually defined by their outer diameter. Others are drawn for one driver size, such as a 5.25, 6.5 or 8 inch woofer, and some are shaped for a specific car interior, where the outline has to follow the trim. Oval 6x9 grills and grills that carry an extra opening for a tweeter form smaller groups of their own.

Before printing, compare the dimensions on the model page with the driver you have: outer diameter, the distance between screw holes, flange thickness and the depth of any recess. Check whether the author notes supports, print orientation and the material and settings used, and look at photos of real prints to judge how thin the ribs and mesh are. Thin grills print better in a rigid filament, while parts that flex or clip into place may call for something else.

Search results improve when you try the other words people use for the same part: grille, cover, mesh, guard or baffle. Adding a size in both millimetres and inches, or a vehicle model, narrows the list quickly. Related searches worth trying include speaker adapter rings, tweeter mounts, port covers and amplifier rack panels, since these often appear alongside grills in the same builds.

FAQ

Questions fréquentes

What measurements do I need before printing a speaker grill?
Note the outer diameter of the driver frame, the screw hole spacing and the depth of the recess the grill sits in. Compare those with the dimensions listed on the model page before slicing.
Do speaker grills need supports?
It depends on the pattern and the orientation. Open mesh designs with wide openings often print without them, while fine grilles with deep recesses may need them; the author's page usually states what was used.
Can a grill be scaled to fit a different driver size?
Scaling changes the hole spacing, flange thickness and rib width at the same time, so the mounting holes may no longer line up. A version drawn for your size is a safer starting point.
Which filament do people use for speaker grills?
Rigid filaments such as PLA or PETG are often chosen for thin ribs and mesh, while parts that flex or clip in place may use something more elastic. Check the material and settings the author lists.
Voir aussi
Électronique

3D-модели колонок и динамиков для печати

32843 modèles
Électronique

Адаптеры для динамиков - STL модели для 3D-печати

4147 modèles
Électronique

3D-модели динамиков на 2 дюйма для печати

12817 modèles
Électronique

Корпуса для фронтальных динамиков: 3D-модели и STL

4311 modèles
Électronique

3D-модели динамиков и аудиосистем для ATV

5254 modèles
Électronique

3D-модели решёток для динамиков на 8 дюймов

62573 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories