Animaux de compagnie

Transom Water Intake: 3D Models and STL Files

This collection gathers 3D models tied to water intake: hose and pump strainers, engine intake screens, RC boat cooling inlets, aquarium intake parts and a few drinking-water trackers and stencils. It is useful when a small intake component is missing, cracked or needs a different thread or diameter than the one you have. Each listing comes from a different platform, so the file format and the notes for 3D printing vary from model to model. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 44572 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 44572 modèles
À propos de la catégorie

«Transom Water Intake: 3D Models and STL Files»

The parts differ mostly by where they sit in the water path. Strainers and screens sit at the opening and keep debris out, so their mesh size, wall thickness and thread matter. Engine intake screens and grilles follow a specific housing shape, while RC boat inlets are small and often paired with a second inlet for cooling. Aquarium and filter intake pieces are usually simple tubes or covers that clip onto existing hardware, and the tracker and stencil entries belong to the drinking-water side of the same search term.

Before printing, read the model page for the dimensions the author lists: thread size, outer diameter, hose fit and overall length. Check how many parts the file contains and whether assembly or glue is expected, and whether the geometry needs supports. The material and settings the author mentions are a starting point; a part that sits in water or takes vibration may call for a different filament or resin than the one shown. Photos of real prints on the page tell you more about surface finish and fit than a render does.

If the results are too narrow, try the wording used around this topic: intake strainer, intake screen, grille, hose filter, cooling inlet, or the engine and hull terms that go with them. Searching by thread size or diameter, such as a fractional inch or metric value, often narrows a long list faster than a brand name. Related searches like raw water intake, sea strainer, bait boat fittings or pump intake cover lead to neighbouring parts that may fit the same opening.

FAQ

Questions fréquentes

What is a transom water intake on a boat?
It is the opening through the hull or transom where water enters a cooling or pump system. Models in this collection cover the screen, strainer or grille that sits over that opening and the fittings around it.
Which file details should I check before printing an intake part?
Look at thread size, outer diameter, hose diameter and length, plus the number of separate parts. The author's notes on material and orientation help you decide how to place the model on the build plate.
Can these models be scaled to fit a different hose or fitting?
Scaling changes wall thickness and thread pitch along with the diameter, so a scaled thread may no longer match. Where the author provides a parametric or multi-size file, pick the version closest to your measurement instead of resizing.
How do I search for a related intake part?
Use the terms around the component rather than the whole assembly: intake strainer, intake screen, cooling inlet, pump intake cover or sea strainer. Adding a diameter or thread value to the query usually shortens the list.
Voir aussi
Outils et équipement

Transom Intake Fitting 3D Models and STL Files

6031 modèles
Recherche générale

Water Intake Port 3D Models and STL Files

6295 modèles
Maison et quotidien

Transom 3D Models: Boat Mounts, Fan Adapters, STL

3909 modèles
Pièces d’imprimante

3D Models for 1.4 Engine Intake Parts

2640 modèles
Miniatures et wargame

28mm Adapters and Terrain: 3D Models to Print

12437 modèles
Personnages

Water Dragon 3D Models: STL Files for 3D Printing

2773 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories