Objets

Vacuum Valve STL Models for 3D Printing

This collection gathers STL files for vacuum valves used with storage bags, cyclone separators, ducting and small machines. The models range from flat valve discs to multi-part connectors, so you can match a design to the port you already have. Each entry is a starting point for 3D printing rather than a finished part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 25994 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 25994 modèles
À propos de la catégorie

«Vacuum Valve STL Models for 3D Printing»

The most common group is valves for vacuum bags: flat discs, small check valves and suction rings that let air out and keep it from returning. A second group covers cyclone separators, where the valve sits on the dust container and releases the pressure built up by the airflow. There are also connector valves defined mainly by pipe diameter, and a few special-purpose parts such as anti-vacuum valves for espresso machines.

Before printing, compare the port or bag opening you have with the dimensions the author lists, since a valve that is a few millimetres off will not seal. Look at how many parts the model contains, whether a spring, membrane or ball is used, and whether the author shows the layer height, material and wall count they used. Photos of real prints are more informative than renders, especially for thin sealing lips.

If a search returns little, try the terms used in this field: check valve, non-return valve, one-way valve, or the German Unterdruckventil and the Italian sottovuoto. Adding a diameter such as DN40, DN50 or DN75 narrows the results to a specific port size. Related topics worth browsing include cyclone separators, vacuum bagging, filament storage bags and dust collection fittings.

FAQ

Questions fréquentes

What kinds of vacuum valve models are collected here?
Most entries are valves for vacuum bags, cyclone separator valves, duct connectors sized by pipe diameter, and a smaller number of special-purpose valves for machines. Each type differs in how it seals and how it mounts.
Which dimensions should I check before printing a valve?
Compare the port or bag opening diameter, the outer diameter of the sealing disc and the height of the part with the measurements on the model page. The wall thickness around the sealing edge also matters for how the part behaves.
Do these valves need extra parts such as springs or seals?
Some designs are printed as a single piece and rely on a flexible lip, while others are made for a spring, ball or O-ring. The model page usually states which additional parts the author used.
How can I find a valve for a cyclone separator?
Search for cyclone valve, dust separator valve or Unterdruckventil alongside the diameter of your container opening. Browsing cyclone separator and dust collection models often leads to matching fittings.
Voir aussi
Objets

3D Models for Valve Boxes and Covers

3957 modèles
Maison et quotidien

Pool Valve 3D Models: STL Parts and Adapters

2502 modèles
Sport et fitness

3D Models for PVC Boat Valves and Adapters

3845 modèles
Maison et quotidien

Ventilation Valve 125 mm: 3D Models and STL Files

19836 modèles
Outils et équipement

Pressure Valve Nuts: 3D Models and STL Files

5617 modèles
Sport et fitness

3D Models for PVC Boat Valve Caps and Covers

2480 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories