Électronique

GPU Support Brackets and Videocard 3D Models

This collection gathers 3D models built around graphics cards: brackets that hold a card level, mounts for specific case layouts, covers and a few scaled replicas. Most of them are small parts that solve a fitting or sagging problem inside a desktop build. They are useful when you want a printed part matched to your own card length and case, rather than a generic accessory. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 1464 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 1464 modèles
À propos de la catégorie

«GPU Support Brackets and Videocard 3D Models»

The largest group is made up of holders and brackets that sit under or beside a graphics card to keep it from tilting. They range from simple fixed posts to adjustable designs with a screw or sliding column, and some are drawn for a particular case model or fan layout. A second group covers shrouds, backplate covers and finned pieces that change how a card looks or how air moves around it. A smaller set consists of kit cards and scaled-down card replicas, which are display or assembly items rather than working parts.

Before printing, read the author's page for the card length and thickness the part was drawn around, the number of separate pieces, and whether the model expects screws, inserts or adhesive. Check whether supports are needed and how the part is oriented on the bed, since a tall thin bracket printed flat behaves differently from one printed upright. The material and settings the author lists matter too: a part that sits close to a hot card or a fan should be printed in a filament that keeps its shape at raised temperatures. Look at photos of real prints to judge wall thickness and how the contact point meets the card.

If the first results do not match your build, try other wording: anti-sag bracket, GPU support jack, graphic card stabilizer, vertical mount, slot cover, or the name of your case layout. Related searches such as PC case accessories, fan shrouds, cable combs or mini ITX parts often surface parts that fit the same space. Combining a card term with a case or fan term narrows the list faster than browsing a general PC category.

The models here are made by different authors for different setups, so measurements and mounting methods vary widely. Treat each listing as a starting point and confirm the dimensions against your own card and case before you commit filament to a print.

FAQ

Questions fréquentes

What is a GPU anti-sag bracket for?
It is a printed prop or arm that sits between the case floor or a fan and the graphics card, holding the card level so its rear edge does not droop over time. Adjustable versions let you set the height to match your card.
How do I pick a holder that fits my card?
Compare the card length, thickness and the gap under it with the dimensions on the author's page. Case-specific designs also assume a particular fan or slot layout, so check that your chassis matches.
Which filament works for parts near a graphics card?
Parts that sit close to a hot card or a fan benefit from a filament with a higher softening point, such as PETG, ABS or ASA. The author's page usually states the material and settings used for the shown print.
Can I scale a videocard model to another size?
Scaled replicas can often be resized, but brackets and covers usually cannot, because screw holes and contact points are tied to real dimensions. Check the author's notes before changing the scale.
Voir aussi
Électronique

FPV Mark 4 3D Models: STL Parts for Frames and Mounts

7323 modèles
Électronique

Strobe Mounts and Lamp Parts: 3D Models to Print

4447 modèles
Électronique

3D Models for Battery Replacement Cases and Holders

2812 modèles
Électronique

3D Models of Battery Compartment Covers

163316 modèles
Électronique

SPM6550T 3D Models: Cases, Covers and Mounts

1216 modèles
Électronique

Pedal and Resistor 3D Models for Printing

6344 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories