Elettronica

18650 Case and Holder STL Files for 3D Printing

This collection gathers 18650 cases, holders and brackets shared as STL files for 3D printing. It covers everything from a single-cell bracket to multi-cell boxes and hinged enclosures, so you can match the shape to how the cell will be used. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 4 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 13/10/2026

Vedi la raccolta Mostra tutti: 119086 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 119086 modelli
Informazioni sulla categoria

«18650 Case and Holder STL Files for 3D Printing»

The most common kind is a holder or bracket that grips one cell, often with a spring or flexing arm to keep it in place. Larger boxes take two, three or four cells side by side, and some are split into a base and a lid that closes with screws or a hinge. A smaller group is shaped around a particular device, so the cell sits inside the same shell as the board it powers.

Before printing, read the author's page for the cell diameter and length the model expects, since 18650 cells vary slightly and a tight fit can crack a thin wall. Check how many parts the model has and whether they are meant to be glued, screwed or snapped together, and whether the geometry needs supports. Look at the material and settings the author lists, and at photos of real prints, because wall thickness and layer direction matter where the holder flexes.

To narrow the results, try related terms such as battery holder, cell bracket, battery box or enclosure, and add the cell count you need. If the model is meant for a specific board or device, searching that device name alongside the cell type usually returns a closer fit. You can also search by the way the case closes, for example hinged, screw-on or print-in-place.

FAQ

Domande frequenti

What is the difference between an 18650 case and an 18650 holder?
A holder usually grips the cell and leaves the contacts accessible, while a case encloses it fully or partly. Many models sit between the two and do both.
Do 18650 cases need supports?
It depends on the geometry. Flat boxes and brackets often print without them, while round cutouts, overhangs and hinges may need supports. The author's page usually states what was used.
How do I check that a cell will fit?
Compare the dimensions given on the model page with the diameter and length of your cell. Protected cells are longer than bare ones, so allow for the extra length.
Can the same model take other cell sizes?
Some files are drawn for more than one size or include a scaled version. Check the description for the sizes covered before printing.
Correlati
Elettronica

18650 8S Case 3D Models and STL Files

4484 modelli
Elettronica

18650 Battery Holder and Cell 3D Models

18115 modelli
Elettronica

18650 Battery Case STL Models for 3D Printing

139062 modelli
Elettronica

3D-модели коробок и боксов для 18650

175056 modelli
Elettronica

18650 Battery Holder STL Models for 3D Printing

482740 modelli
Elettronica

3D Printing STL Files for 18650 Battery Assembly

22624 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie