Oggetti

Pocket Wet Wipe Box 3D Models and STL Files

This collection gathers STL files for small containers that hold wet wipes, from slim lids that sit on a pack to lidded boxes for a whole stack. The models come from several platforms, so shapes, closures and sizes can be compared in one place. It is useful when you want to replace a broken holder or print one around the packs you already buy for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 3 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 12/10/2026

Vedi la raccolta Mostra tutti: 3122 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 3122 modelli
Informazioni sulla categoria

«Pocket Wet Wipe Box 3D Models and STL Files»

The range splits into a few practical groups. Some files are thin pocket lids that snap over the opening of a soft pack and keep the top wipe within reach. Others are rigid boxes with a hinged or magnetic lid, sometimes with a rubber-like insert that presses against the pack. There are also wall-mounted holders, countertop organizers for dry tissues, and weighted dispensers that stay in place while you pull a wipe out with one hand.

Before printing, look at what the author states on the model page. Check the outer dimensions and the pack size the shape was drawn around, since a few millimetres decide whether a lid grips or slips. Note the wall thickness, how the lid closes, whether magnets, screws or a printed pin are involved, and if the overhangs call for supports. The material and settings listed by the author, along with photos of real prints, tell you more than the render does.

To widen the search, try the other names these objects go by: tissue box, wipe dispenser, wet wipe holder, travel lid, refillable case, pocket organizer. Adding a closure or mounting word narrows the list, for example magnetic, snap-on, hinged, wall mount or keychain. Related topics such as bathroom accessories, baby care items or desk organizers often surface shapes that fit the same job.

FAQ

Domande frequenti

How do I pick a size for a pocket wet wipe box?
Measure the pack you use, including its thickness when full, and compare that with the dimensions given on the model page. A lid that matches the opening is usually easier to work with than a full box that must fit the whole pack.
Do these boxes need supports when printed?
It depends on the geometry. Flat lids and two-part designs often print without them, while deep recesses, magnet pockets or rounded undersides may need them. The author's notes usually say which way the part was oriented.
Which filament works for a wipe holder?
For a rigid box that stays dry, common filaments are fine. If a part has to flex or press against the pack, a softer material is often chosen for that piece. Check what the author lists for the model.
Can I scale a model to fit my pack?
Small adjustments are usually safer than large ones, because scaling also changes wall thickness, lid clearance and any magnet pockets. If the difference is big, look for another model drawn closer to your pack size.
Correlati
Casa e vita quotidiana

Box per salviette umidificate in 3D

190125 modelli
Casa e vita quotidiana

Box per salviette umidificate mini: modelli 3D da stampare

4935 modelli
Casa e vita quotidiana

Contenitore per salviette umidificate da stampare in 3D

197902 modelli
Casa e vita quotidiana

Modelli 3D per contenitori di salviette umidificate

68915 modelli
Cucina

Portatovaglioli 3D: modelli STL da stampare

5311 modelli
Oggetti

Clip e porta-oggetti da cintura e tasca in STL

37218 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie