Oggetti

UNO Card Case 3D Models and STL Boxes

This collection gathers 3D-printable cases, boxes and holders for UNO decks and other playing card sets. The range covers slim snap-lock boxes, open holders and dispensers, so the shape can match how the cards are stored and used. Each entry is a separate STL or model set prepared by its author for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 3 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 14/10/2026

Vedi la raccolta Mostra tutti: 1709 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 1709 modelli
Informazioni sulla categoria

«UNO Card Case 3D Models and STL Boxes»

The models fall into a few groups. Enclosed cases with a lid or latch protect a full deck in a bag or pocket, while open holders keep cards upright on a table during play. Dispensers feed cards one at a time, and some boxes are sized for two decks or for smaller and larger card counts. Differences come down to wall thickness, lid clearance and how the deck sits inside.

Before printing, compare the card dimensions and the height of the stack with what the author states, since decks vary in size and thickness. Look at the number of parts and how they join, whether supports are needed, and the material and settings listed on the model page. Photos of real prints show how the lid closes and how much space is left around the cards.

If the results feel narrow, try other terms: card box, deck box, card holder, playing card case, tuck box or deck sleeve. Related searches include card game storage, board game inserts and boxes for other card sizes. Combining a case type with a deck size usually narrows the list faster than a single broad phrase.

FAQ

Domande frequenti

Will a case made for one deck fit another deck?
It depends on the card dimensions and the height of the stack. Check the card size and count the author lists, then measure your own deck before printing.
Do these card boxes need supports?
Some are shaped to print without them, others include overhangs that need support. The model page and the print photos usually show which approach the author used.
Which filament works for a card case?
PLA and PETG are common choices for boxes and holders. Thin latches and hinges flex more, so follow the material notes the author gives for that model.
Can a card case be scaled up or down?
Scaling changes wall thickness and the clearance around the cards. Small adjustments may still fit, but check the fit again after slicing.
Correlati
Oggetti

UNO Card Case 3D Models and STL Files

11163 modelli
Elettronica

Arduino Uno R3 Case 3D Models and STL Files

4062 modelli
Hobby e maker

UNO 3D Models: Arduino Cases, Shields and Card Boxes

32268 modelli
Hobby e maker

Card 3D Models: Boxes, Holders and Kit Cards

26071 modelli
Utensili e attrezzature

Micrometer and Caliper 3D Models and STL Files

1561 modelli
Oggetti

Card Deck Box STL Models for 3D Printing

3504 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie