Elettronica

RJ45 and Ethernet 3D Models: Caps, Locks, Mounts

This collection gathers STL files for RJ45 and Ethernet hardware: dust caps, port locks, repair clips, mounting brackets and outlet covers. Most of these parts are small, so they print quickly on any 3D printer and are easy to reprint if a fit is off. The range is useful when a connector, port or cable needs a small physical fix rather than a replacement. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 3 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 15/10/2026

Vedi la raccolta Mostra tutti: 1631 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 1631 modelli
Informazioni sulla categoria

«RJ45 and Ethernet 3D Models: Caps, Locks, Mounts»

The models split into a few practical groups. Caps and covers close unused ports or protect a plug when it is not connected, while locks and blockers hold a cable in place or keep a port closed. Repair aids deal with damaged parts of a cable, such as a broken retention tab, and crimping helpers guide the wires or keep pairs untwisted. Mounts and rack adapters position a socket or converter in a panel, and outlet covers tidy a wall plate.

When choosing a file, check the dimensions the author lists against your own hardware: port opening, plug width, tab thickness and the depth of the housing. Look at the number of parts and whether assembly is needed, and read the notes on supports and orientation, since small clips and thin tabs often print better flat or with a specific layer direction. The material and settings the author mentions matter for parts that flex, and photos of real prints show how the tolerances behave better than a render.

To narrow the results, search by the connector name and the function together, for example Ethernet dust cap, LAN port plug or patch panel bracket. Related terms help when a listing uses different wording: keystone jack, wall plate, network socket, cable clip, blanking plug, strain relief. If you are working on a specific setup, add the surrounding part, such as rack, panel or converter, and try both RJ45 and RJ-45 spellings.

FAQ

Domande frequenti

What should I measure before printing an RJ45 dust cap?
Measure the port opening and the depth you want the cap to sit at, then compare those numbers with the dimensions on the model page. A small difference in wall thickness can change how firmly the cap holds.
Do these parts need supports?
It depends on the shape. Flat caps and covers usually print without them, while brackets with overhangs or side openings may need supports. Check the author's notes and the orientation shown in the photos.
Which material works for clips and tabs that flex?
Parts that bend repeatedly are usually printed in a tougher filament than standard rigid PLA, and the layer direction matters as much as the material. The author's page often states what was used for the shown print.
Can I scale a model to fit a different socket?
Scaling changes wall thickness and clearance along with the outer size, so a scaled cap may no longer grip or may not fit at all. It is safer to look for a version drawn for your port type.
Correlati
Elettronica

3D Models of Walkie-Talkies and Radio Accessories

7933 modelli
Elettronica

FPV Drone Legs: STL Models for Landing Gear

3282 modelli
Elettronica

Servo Control 3D Models and STL Parts

28743 modelli
Elettronica

Meshtastic V4 STL Models for Node Enclosures

1375 modelli
Elettronica

Lowrance 7 Fish Finder Accessories: 3D Models

1420 modelli
Elettronica

7-Inch FPV Drone STL Models and Printable Parts

13098 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie