乗り物

Air 75 Canopy STL Files for Micro FPV Quads

This collection gathers 3D-printable canopies for Air 75-class micro quads and similar small FPV frames. Most files are top shells and camera mounts drawn for TPU, with variants for different camera units and antenna holders. If you fly a small quad and want to replace or reshape its top, these STL files are a starting point. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル3159件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル3159件をすべて表示
カテゴリについて

«Air 75 Canopy STL Files for Micro FPV Quads»

The largest group covers canopies for 65, 75 and 85 mm micro frames, often with a cutout for a particular camera unit and a separate holder for the antenna. Another group is built around thin, stiff shells printed in TPU and shaped for a lower camera angle. A few entries leave the drone world entirely, such as canopies for RC helicopters or architectural models, so read the title before downloading.

On the author's model page, look at which camera unit the mount is drawn around, the lens angle, the wall thickness and the number of separate parts. TPU is the usual material for these shells because it bends on impact, and the shore hardness and print temperature the author lists matter more than the colour. Photos of real prints show how the canopy sits on the frame and where the antenna exits.

Search terms vary between canopy, top shell, camera mount and head cover, and many titles combine the frame size with the camera name. Adding the camera unit or the frame size narrows the results quickly, while related topics such as antenna holders, camera mounts, propeller guards and frame spares often appear alongside. If a result is a full model rather than a small part, the same words with mount or holder usually bring back the smaller pieces.

FAQ

よくある質問

What material are these canopies printed in?
Most authors design them for TPU, which flexes instead of cracking in a crash. Some thinner shells are also printed in rigid filament, and the model page usually states the intended material.
How do I know which camera a canopy is drawn for?
The title or description normally names the camera unit and lens, and the photos show the cutout. Compare the mounting hole spacing and lens angle with your own unit before printing.
Can I scale a canopy to another frame size?
Scaling changes wall thickness and screw holes, so a scaled part may not line up with the frame. Look for a version drawn for your frame size instead.
Do these canopies need supports?
Many are drawn as a single shell with an open underside, so supports are often limited to overhangs around the camera opening. The author's notes and print photos show the orientation used.
関連
乗り物

E-75 3D Models: Tanks, Fan Shrouds and STL Parts

モデル70849件
総合検索

STL Models Around 55–75 mm and Related Parts

モデル2000件
乗り物

Air Intake 3D Models: STL Files for Ducts and Scoops

モデル6815件
乗り物

Air Intake 3D Models and STL Files to Print

モデル37470件
乗り物

Air Diffuser 3D Models: Vent, Fan and Tank STL Files

モデル33874件
乗り物

Meteor75 Pro Canopy STL Models for FPV Drones

モデル63490件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く