電子工作

3D Models for Antenna Mounts and Mechanisms

This collection gathers STL files for antenna mounts, brackets, masts and the small mechanisms that hold or move them. Alongside those you will find enclosures for radio gear and robot joints, so the same search covers both the antenna itself and the parts around it. It is useful when a 3D printer is the quickest way to fit a specific antenna to a specific frame or mast. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル12409件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル12409件をすべて表示
カテゴリについて

«3D Models for Antenna Mounts and Mechanisms»

The models split roughly into two groups. One group is structural: mounts, brackets, T-shaped adapters, ground mounts and wire spools sized for particular antenna types or frames. The other group is mechanical or electronic: robot jaw and neck joints, sliding linkages, and cases for radios, tags and cameras. Puzzle boxes with internal moving parts appear as well, since they use the same tolerances and clearances as any small mechanism.

When choosing a model, read the author's page rather than the title alone. Check the stated dimensions and scale, how many parts are involved and how they assemble, whether supports are needed, and which material and print settings the author lists. Photos of actual prints are the most useful signal for fit, wall thickness and how the threaded or sliding sections behave.

To widen or narrow the search, try synonyms and related terms: antenna holder, bracket, mast, ground mount, spool, boom, or the frame and radio names you are working with. For the mechanical side, terms like hinge, joint, linkage, slider and enclosure bring up different results. Combining a part name with a material or a connection type often filters the list faster than browsing.

FAQ

よくある質問

What is the difference between an antenna mount and an antenna bracket?
The words are often used interchangeably. A mount usually carries the antenna on a frame or mast, while a bracket tends to be a smaller adapter that connects two existing parts. The author's page shows the actual geometry.
How do I know if a mechanism will fit my build?
Compare the dimensions on the model page with your own measurements, especially hole spacing, shaft diameter and clearances. Printing a small test piece first helps confirm the fit before committing to the full part.
Do these parts need supports?
It depends on the orientation and overhangs of each model. Some are designed to print flat without supports, others include threads or bridges that need them. The author's notes usually state which case applies.
Which material works for antenna parts used outdoors?
Material choice affects stiffness, UV resistance and how much the part flexes in wind. The model page often names the material the author used, which is a reasonable starting point for your own print.
関連
電子工作

Antenna Rotator Mechanism 3D Models

モデル37744件
電子工作

3D Models for Antennas: Cases, Mounts, Parts

モデル50264件
オブジェクト

Mechanism 3D Models: Gears, Locks, Linkages

モデル77332件
電子工作

3D Printed Antenna Holder STL Models for FPV and RC

モデル550371件
電子工作

Antenna Control 3D Models and STL Files

モデル3230件
電子工作

Antenna Matrix 3D Models and STL Files

モデル11769件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く