ホビー・ものづくり

FPV Plane 3D Models and STL Files for 3D Printing

This collection gathers 3D models for FPV planes: airframes with camera positions, camera and transmitter mounts, rubber-band gliders, racer and jet layouts, and scale aircraft. Most files are meant for a 3D printer, while motors, servos, carbon tubes and electronics usually come from elsewhere. It helps you compare layouts before committing to a build. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 6サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル47048件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル47048件をすべて表示
カテゴリについて

«FPV Plane 3D Models and STL Files for 3D Printing»

The models differ mainly in how they fly and how they are put together. Fixed-wing airframes range from small park flyers to long-span designs built for steady cruising, and some carry a dedicated bay for a camera. Gliders and rubber-band powered planes use few printed parts and no motor, while racer and jet designs rely on pusher props or ducted fans and stiffer structures. Mounts are a separate group: brackets that hold a camera or transmitter on a plane or drone.

When you open a model page, check the wingspan and scale first, then the number of parts and how they join. Look at whether the author expects glue, screws or carbon rods, and whether supports are needed for overhangs. Read the material and slicer settings the author lists, and look at photos of real prints to judge surface quality and wall thickness. Also note which parts are not printed, such as spars, hinges, motor mounts or landing gear.

To narrow the search, try synonyms and related terms: RC plane, fixed-wing, glider, pusher plane, EDF jet, flying wing, camera mount, antenna mount, wing, fuselage. Combining a type with a size or a component, for example a small flying wing or a long-range transmitter mount, usually returns fewer and more relevant results. Related topics such as drones, flight controllers and VTOL conversions can also surface parts that fit a plane build.

FAQ

よくある質問

What files do I need for an FPV plane build?
Typically an airframe set with wings, fuselage and tail, plus a mount for the camera and one for the antenna. Check each model page to see which parts are printed and which are bought.
How do I pick a wingspan for a printed FPV plane?
It depends on the electronics you plan to carry and the space you fly in. Small spans suit light setups and tight areas, while larger spans give more room for gear and calmer flight.
Can printed plane parts be combined with bought hardware?
Yes. Carbon tubes, spars, motors, servos and control linkages are common additions. The model page usually states the dimensions and the parts the author used.
How do I find a camera mount that fits my setup?
Search by the component type and its dimensions rather than by model name. Compare the mounting holes, the angle and the space around the camera before printing.
関連
ホビー・ものづくり

RC Plane 3D Models and STL Files for 3D Printing

モデル77166件
ホビー・ものづくり

FPV Holder 3D Models: Goggles, Batteries, Mounts

モデル5525件
ホビー・ものづくり

FPV Mark 4 drone STL mounts and TPU parts

モデル167868件
ホビー・ものづくり

3D Models for Mark 4 and Mark 5 FPV Frames

モデル3870件
ホビー・ものづくり

FPV Keychain 3D Models to Print

モデル2497件
ホビー・ものづくり

FPV PVC Gates and Connectors: 3D Models to Print

モデル23653件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く