乗り物

Car Clip Fastener 3D Models and STL Files

This collection gathers 3D models of the small clips and fasteners used on cars: trim and bumper retainers, cable and hose locks, push-fit panel clips and trunk latch parts. Most files are shared as STL, so they can be sliced for a 3D printer at home or in a workshop. It is useful when a plastic clip breaks and the original part is awkward to source. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル2423件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル2423件をすべて表示
カテゴリについて

«Car Clip Fastener 3D Models and STL Files»

The models fall into a few groups. Trim and bumper retainers are push-in parts with a wide head and split legs that grip a hole in a panel. Cable and hose clips hold a line in place with a snap or a screw, while door and panel clips use a push-twist or side-latch shape. Trunk and lid items are often repair pieces that stand in for a broken latch or anchor.

Before printing, open the author's page and read the listed dimensions: diameter, stem length, head thickness and the gap the clip has to bridge. Check how many parts the model has and whether it needs assembly, a screw or supports. Look at the material and settings the author notes, because a stiff filament can crack when a clip is snapped into place while a softer one bends. Photos of real prints show how the part sits once it is off the build plate.

Search terms can be widened if the first attempt returns little. Try synonyms such as retainer, fastener, grommet, push clip, trim clip or rod lock, and add the area of the car: bumper, door card, trunk, engine bay, hose. Related topics like cable organizers, panel fasteners or replacement knobs may return shapes that fit the same opening. Pairing a size in millimetres with the word clip usually narrows the list faster than a single keyword alone.

FAQ

よくある質問

What does a rod or linkage clip do on a car?
It is a small plastic fastener that keeps a rod, cable or trim panel in position and stops it from rattling or slipping. Many of them also act as a quick release, so the part can be pulled apart by hand.
Which filament works for car clips?
Material choice matters, since PLA is stiff and can crack when a clip is flexed into place, while PETG, ABS or ASA tolerate bending better. The author's page usually states the material and settings that were used.
How do I search for a clip when I do not know its name?
Measure the hole or the stud it has to grip, then search by that size together with a general word such as clip, retainer or fastener. Adding the location on the car, like bumper or trunk, helps separate similar shapes.
Do these clips need supports when printed?
It depends on the geometry: flat push-in clips often print upright without them, while parts with overhangs or a hollow stem may need them. Check the author's notes and the photos of finished prints before slicing.
関連
乗り物

8 mm Auto Retainer Clips: 3D Models and STL Files

モデル414376件
乗り物

Car Clip 3D Models and STL Files for 3D Printing

モデル100441件
工具・機材

3D Models for Rod Clamps and Bushings

モデル27233件
工具・機材

8 mm Clip STL Models for 3D Printing

モデル3710件
乗り物

Caravelle T6 Rod Retainer: 3D Models and STL Files

モデル2397件
乗り物

Dashboard Panel Clips: 3D Models and STL Files

モデル2410件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く