オブジェクト

Hemisphere Covers: 3D Models and STL Files

This collection gathers STL files built around a hemispherical cover: domes that sit over vents, batteries, glass and small enclosures. Most of them are simple shells, so they print without much fuss on a common 3D printer. It helps when you need a rounded cap that matches an existing opening rather than a flat panel. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月14日

コレクションを見る モデル1452件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル1452件をすべて表示
カテゴリについて

«Hemisphere Covers: 3D Models and STL Files»

The models fall into a few groups. Some are protective caps for vents, grilles or battery compartments, where the dome keeps dust or weather off a small opening. Others are structural: enclosure halves, project boxes and corner pieces that use a rounded top for a reason. A third group is decorative, where the hemisphere is a shape study, a planter dome or a cover over glass.

When you open a model page, check the diameter and height first, then the wall thickness and whether the base has a lip or flange for fixing. Look at how the part is oriented for printing: a dome printed open-side down usually needs supports inside, while a split version may avoid them. The author's notes on material, layer height and infill matter more here than usual, because thin curved walls show layer lines and can flex. Photos of real prints show how the top of the dome comes out.

To narrow the results, try words that describe the function rather than the shape: dome, cap, lid, housing, vent cover, battery cover, enclosure. Adding a size or a thread, such as a diameter in millimetres or a metric bolt size, filters out unrelated parts. Related topics worth checking are project boxes, grille covers, planters and basic geometry primitives, since a plain hemisphere can often be scaled or cut to fit.

FAQ

よくある質問

What is a hemisphere cover used for?
It is a rounded cap that fits over an opening such as a vent, a battery slot or a small enclosure. The curved surface sheds dust and water better than a flat lid and often matches the shape of the part underneath.
Do domes need supports when printed?
It depends on orientation. Printed open-side down, the inside of the dome overhangs and usually needs supports; printed as two halves or with a chamfered rim, the overhang can be reduced. Check the orientation the author shows in the file.
How do I match a cover to an existing opening?
Measure the opening's inner or outer diameter and the height you need, then compare those with the dimensions listed on the model page. If the model is a plain hemisphere, scaling it in the slicer is often enough, as long as the wall thickness stays printable.
Which material works for a curved cover?
Rigid filaments hold the dome shape well and keep layer lines even; flexible ones tolerate being snapped on and off but may sag on large unsupported spans. The author's page usually names the material and settings used for the shown print.
関連
オブジェクト

Hemisphere 3D Models: STL Halves, Globes and Molds

モデル2388件
オブジェクト

Cap and Lid 3D Models for Printing

モデル297148件
アート・インテリア

Hemisphere with Cross 3D Models and STL Files

モデル7090件
アート・インテリア

Crystal Hemisphere 3D Models and STL Files

モデル1226件
プリンターパーツ

3D Printer Covers and Enclosures: STL Models

モデル1210695件
オブジェクト

Organizer with Lid: 3D Models and STL Files

モデル242823件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く