工具・機材

Lowrance Elite 9 FS Mounts: 3D Printing Files

This collection gathers 3D printing files for accessories around a Lowrance Elite 9 FS fish finder: mounting brackets, sun visors, transducer supports, stands and caps. The models come from different authors, so shapes, hole spacing and part counts vary from one file to the next. It is useful when you want to adapt a mount to your own boat, rail or desk instead of buying a fixed part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル41件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル1417件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル1417件をすべて表示
カテゴリについて

«Lowrance Elite 9 FS Mounts: 3D Printing Files»

The most common group is mounting hardware. Brackets appear as flat tabs with screw holes, as clamps for a pipe or rail, and as angled arms that hold the unit at a readable tilt. Visors and hoods are a separate group: they shade the screen and usually print as a single curved shell. Transducer supports and boat mounts form a third group, often designed around a specific pipe diameter or hull surface, while table stands and port caps cover desk use and cable protection.

When you open a model page, compare the hole pattern and the outer dimensions of your unit with the drawing or dimensions the author lists. Check how many parts the file contains, whether they join with screws, bolts or glue, and whether the author shows photos of a finished print. Layer orientation matters for brackets that carry load: a part printed flat on its side can split along the layers, so look at how the author oriented it and which material and settings they name.

Search results improve if you try several wordings. Alongside the device name, terms such as fish finder mount, sonar bracket, rail clamp, screen visor, transducer holder or boat dash mount lead to related files. If you need a different unit size, look at models for neighbouring screen sizes and check whether the mounting pattern is the same before you print.

FAQ

よくある質問

What do I need to measure before printing a mount for this fish finder?
Measure the distance between the mounting holes on the back of the unit, the width and height of the housing, and the diameter of any pipe or rail you want to clamp to. Compare those values with the dimensions the author lists on the model page.
Are these parts printed in one piece or several?
It varies. Visors and simple tabs are often a single piece, while brackets with a clamp, a swivel or an adapter are usually split into two or more parts that are joined with screws or bolts. The model page states the part count.
Which material works for a bracket used outdoors?
Authors usually name a filament and settings on the model page. For parts exposed to sun and load, many designs are printed in PETG, ASA or a fibre-filled filament; check what the author used and whether the geometry was oriented to reduce stress between layers.
Can I adapt a model to a different screen size?
Sometimes. If the file is a parametric design, the author may provide the source file so you can change hole spacing or width. Otherwise you can scale the model, but scaling also changes screw holes and wall thickness, so check the result before printing the whole part.
関連
スポーツ・フィットネス

Lowrance Elite Mounts and Sun Shades: STL Files

モデル1150件
工具・機材

Lowrance 3D Models: Mounts, Visors and Covers

モデル486件
電子工作

Lowrance 7 Fish Finder Accessories: 3D Models

モデル1420件
スポーツ・フィットネス

Lowrance 9 fish finder accessories 3D models

モデル22750件
工具・機材

Lowrance Eagle 9 3D Models: Visors, Covers, Mounts

モデル28650件
ガジェット

3D Models for Lowrance 9 Fish Finder Covers and Visors

モデル123631件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く