電子工作

21700 Power Bank STL Models for DIY Builds

This collection gathers 3D-printable parts for building a power bank around 21700 lithium-ion cells. It covers outer cases, cell holders, module mounts and small magnetic bodies, so you can match a design to the electronics you already have. Files are meant for a 3D printer, and most are split into several parts to fit a normal build volume. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月10日

コレクションを見る モデル4035件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル4035件をすべて表示
カテゴリについて

«21700 Power Bank STL Models for DIY Builds»

The designs differ mainly in how many cells they hold and how the cells are wired. Some are single-shell cases for one or two cells, others are trays and frames for parallel or series packs where the cells sit side by side. There are also open frames that hold a ready-made module rather than a bare board, and small magnetic bodies that clip together without screws.

When choosing a model, look at the cell count and the pack layout the author describes, then compare it with the module you plan to use. Check the wall thickness around the cell slots, how the lid or latch closes, and whether the author lists supports, material and print orientation. On the author's page you can usually find the inner dimensions, the number of parts and photos of real prints, which help you judge whether the wiring and the connector cutouts will line up.

To narrow the results, search for the cell format together with the part you need, such as a case, holder, cap or module mount. Related terms include cell spacer, battery tray, 18650 holder and power bank shell, and you can also look at USB-C breakout housings or battery pack enclosures. Combining a capacity or output figure with the layout, for example a four-cell pack or a series build, usually brings up a smaller and more relevant set.

FAQ

よくある質問

What do I need to check before printing a 21700 power bank case?
Compare the inner dimensions with your cells and module, and note the number of parts and how they join. The author's page usually states the material, layer height and whether supports are needed.
Can the same case take 18650 cells instead of 21700?
Only if the model is drawn for both formats or includes adapters. Cell diameter and length differ, so check the slot dimensions before printing.
How are these power bank models usually assembled?
Most are printed as a shell plus a lid, with slots for the cells and cutouts for the connector. Some designs use screws or magnets, others snap together, and the author's description explains the intended order.
Which search terms help find more designs like these?
Try cell holder, battery tray, power bank shell, module mount or pack enclosure, and add the layout such as parallel or series. Adding the connector type also narrows the list.
関連
電子工作

Power Bank and Piggy Bank STL Models to Print

モデル3223件
電子工作

21700 Battery Holder and Case 3D Models

モデル3188件
電子工作

21700 8S Battery Pack 3D Models and STL Files

モデル220411件
電子工作

21700 3S4P Battery Pack 3D Models for Printing

モデル1443106件
電子工作

21700 6S1P Battery Holder 3D Models and STL Files

モデル2366件
工具・機材

21700 Battery Holders and Cases: 3D Models to Print

モデル240624件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く