音楽

3D models of speaker grilles and STL grids

This collection gathers 3D models of speaker grilles and grids, from round covers in set diameters to honeycomb panels and car-specific shapes. It is useful when a ready-made part does not match the opening you have, and a printed grid can be sized to it. Most files are made for desktop 3D printing and come as STL meshes. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 7サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル22260件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル22260件をすべて表示
カテゴリについて

«3D models of speaker grilles and STL grids»

The range splits into a few practical groups. Universal round grids appear in several diameters and often as a set with more than one size, while car versions follow the shape of a door panel or a specific recess and are sometimes paired with a spacer ring. Honeycomb and hex panels are flat sheets used for cabinets, arcade builds or device shells, and a separate group carries a name, logo or a small clip that holds the grille in place.

Before printing, read the model page for the outer diameter, the thickness of the rim and the spacing of the mounting holes, since those decide whether the part lines up with your opening. Check whether the author shows supports or a bridging direction for the hex pattern, which material and layer height were used, and whether photos of real prints are included. A grille printed flat in one piece behaves differently from one built as a frame plus an insert.

If the first results are thin, try other words for the same part: grille, grill, mesh, cover, ring, adapter or spacer, and add the place it goes, such as door panel, cabinet, subwoofer or arcade cabinet. Related searches like honeycomb panel, hex grid or speaker bezel often surface files that the main term misses. Scaling a model is possible, but hole spacing and rim thickness change with it, so recheck the fit after any resize.

FAQ

よくある質問

How do I pick the right grid diameter?
Measure the opening or the driver frame, not the cabinet, and compare it with the outer diameter listed on the model page. If the file is a set, print the closest size first and test the fit before committing to a longer print.
Do these grids need supports?
Flat honeycomb panels usually print without them when the printer bridges the pattern well. Tall rims, clips and recessed mounting bosses may need supports, and the author's page often states what was used.
Can I scale a grille to fit my speaker?
Yes, but scaling changes the hole spacing, rim thickness and wall width at the same time. After resizing, check that the mounting holes still line up and that the walls remain thick enough to hold.
Which material works for a speaker grille?
Many people print these in PLA or PETG, and the choice depends on heat near the driver and on how much flex the clips need. The model page usually names the material and settings the author used.
関連
オブジェクト

Speaker Grills and Mesh Panels: STL Models for 3D Printing

モデル26389件
音楽

3D Models for 16 cm Speaker Grilles and Rings

モデル40351件
オブジェクト

Grid 3D Models: STL Files for Storage and Ventilation

モデル95294件
暮らし・日用品

Grid Organizer 3D Models: STL Baseplates and Bins

モデル5014件
ガーデニング

Mesh Planter and Net Pot STL Models for 3D Printing

モデル12344件
暮らし・日用品

3D Models of Mesh Containers and Baskets to Print

モデル2915件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く