オブジェクト

1/4-Inch Fittings: 3D Models for Threads and Hose

This collection gathers 3D models of 1/4-inch fittings: threaded nipples and adapters, hose barbs, quick-connect and push-to-connect bodies, plus small screw adapters. Most files are meant for a 3D printer that can hold tight tolerances on threads and round bores. The range is wide, so the useful work is comparing thread standards, sizes and part counts before you commit to a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 5サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル790842件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル790842件をすべて表示
カテゴリについて

«1/4-Inch Fittings: 3D Models for Threads and Hose»

The models fall into a few groups. Threaded pieces cover male and female ends in NPT, BSP or G series, often as straight nipples, hex bodies or reducing adapters between two different thread sizes. Barbed versions replace one thread with a stepped hose connection, and some branch into Y or cross shapes. Quick-connect and push-to-connect bodies are bulkier, since they need a housing for the release mechanism and a sealing seat.

When choosing a file, read the author's page rather than the thumbnail. Check which thread standard and nominal size is stated, whether the model is a single part or an assembly, and whether supports are needed on overhangs inside the bore. Look at the material and settings the author lists, and at photos of real prints, because printed threads depend heavily on nozzle size, layer height and clearance. If a counterpart part already exists in your setup, measure it and compare against the dimensions given.

Search results improve when you vary the wording. Try the thread standard as a term, the connection type, or the hose diameter instead of the nominal size alone; related topics include pneumatic manifolds, hose clamps, barbed reducers, valve bodies and camera screw adapters. Adding a size range or a connection style to the query narrows the list faster than browsing the whole category.

FAQ

よくある質問

What does the 1/4 in these fitting names refer to?
It usually marks the nominal thread or hose size of one end, not a measured outside diameter. Titles often combine two sizes, so read both ends before picking a file.
Which thread standard should I look for?
NPT, BSP and G threads differ in angle and diameter and do not interchange cleanly. Decide which standard matches the parts you already have, then filter the results by that term.
Do printed fittings need supports?
It depends on the orientation and on internal bores and overhangs. Many authors state a preferred orientation and whether supports are needed; check that note and the photos of finished prints.
How do I find a matching counterpart for a fitting?
Search by the opposite connection type, for example a barbed end, a threaded end or a quick-connect plug. Comparing the stated dimensions of both files is the practical way to confirm they pair up.
関連
工具・機材

3/4-Inch Fitting 3D Models and STL Files

モデル1668897件
工具・機材

Coupling and Fitting STL Models for 3D Printing

モデル7264件
工具・機材

Inlet and Fitting Insert 3D Models

モデル6805件
ガーデニング

16 mm Fittings: 3D Models and STL Files

モデル3175件
工具・機材

Internal Thread Fittings: 3D Models and STL Files

モデル31396件
暮らし・日用品

3D Models for Air Conditioner Couplings and Adapters

モデル9259件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く