電子工作

165mm Speaker Grills: 3D Printing STL Files

This collection gathers STL files for 165mm speaker grills: honeycomb panels, mesh covers, door adapters and parametric designs. It helps when a driver needs protection or a mounting plate that no ready-made part provides. Every file is meant for a 3D printer, so the outcome depends on the geometry and the settings you pick. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月14日

コレクションを見る モデル3121件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル3121件をすべて表示
カテゴリについて

«165mm Speaker Grills: 3D Printing STL Files»

The files differ mainly in how open they are and how they mount. Honeycomb and hex patterns leave a large open area and usually sit flat over the cone, while mesh and netting covers use a finer grid that hides the driver more completely. Some designs are domed or deep enough to clear a moving cone, and a few combine a main grill with a separate opening for a tweeter or midrange.

Before printing, read the author's page rather than trusting the diameter in the title. Check the outer diameter, the mounting hole spacing, the panel thickness and the depth above the cone, then compare those with your own measurements. Look at whether the file needs supports, which material and layer height the author lists, and any photos of real prints that show how the pattern came out.

If the first search gives too few results, try other spellings and related terms: grille, gitter, mesh, cover, bezel, woofer, midrange, 6.5 inch, adapter or spacer. Searching by the driver size plus the mounting type, or by the cabinet or vehicle the part belongs to, often turns up files that a plain size query misses. Parametric and scalable versions are worth a look when you need a diameter that no fixed model matches.

FAQ

よくある質問

What does 165mm refer to in these files?
It is the nominal diameter of the driver the grill is drawn around, roughly equal to 6.5 inch. Measure the cutout and the mounting holes on your own speaker, since the real dimensions can differ from the label.
Do speaker grills need support material?
It depends on the shape. Flat honeycomb panels often print without supports, while domed or deep grills may need them under the overhangs. The author's page usually states what the model was printed with.
Can I scale a grill to a different diameter?
Parametric and scalable files let you change the size, but scaling a fixed model also changes the wall thickness and the mesh openings. Check those values after scaling so the panel stays rigid and the pattern does not close up.
Which material is used for printed grills?
PLA, PETG and ABS or ASA all appear in this kind of project. The choice affects stiffness and how the part behaves near a warm amplifier, so follow the material and settings listed on the model page.
関連
電子工作

8-Inch Speaker Grills: 3D Models and STL Files

モデル62573件
電子工作

Speaker Grill STL Models for 3D Printing

モデル3274件
電子工作

3D Printing Speaker Grills and Custom Face Plates

モデル18985件
電子工作

3D Models of Speaker Grills for 16.5 cm Drivers

モデル2971件
電子工作

Speaker 3D Models: Horns, Housings, Mounts

モデル32843件
電子工作

3D Models for Fan Grills and Fan Covers to Print

モデル79818件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く