プリンターパーツ

3D Models for Filament Spools and Spool Holders

This collection gathers 3D models built around filament spools: holders and stands, reusable spools, winders, adapters and storage parts. It is useful when you want to organise a shelf, move filament between spools or replace a worn holder with something you print yourself. Most entries are small enough for a standard 3D printer, though larger racks and enclosures take more time and material. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 5サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月15日

コレクションを見る モデル86770件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル86770件をすべて表示
カテゴリについて

«3D Models for Filament Spools and Spool Holders»

The models fall into a few groups. Holders and stands keep a spool in place while it unwinds, and they differ mainly in how they mount — on a desk, on a printer frame or on a wall. Reusable and refill spools replace the cardboard or plastic core, while winders and switchers help move filament from one spool to another. Adapters, gauges and storage containers deal with the smaller problems: fitting a spool onto a different mount, checking how much filament is left, or keeping moisture away.

When choosing a model, read the author's page before printing. Check the spool diameter and width it is drawn for, the number of parts and how they join, whether supports are needed, and the material and settings the author lists. For anything that carries load or rubs against filament, look at photos of real prints and at comments about fit, since a small change in wall thickness or tolerance can decide whether the spool turns smoothly.

If the results are too narrow, try related terms. Searching for filament holder, spool rack, filament winder, spool adapter, desiccant holder or dry box will surface different designs for the same job. Adding a printer or spool size to the query helps, and browsing the printer parts and tools categories often turns up accessories that are not labelled with the word spool at all.

FAQ

よくある質問

What is the difference between a spool holder and a spool winder?
A holder keeps a spool in place while filament unwinds during printing. A winder moves filament from one spool to another, usually with a crank or a motor and a guide that spreads the strands evenly.
What should I measure before printing a spool holder?
Measure the outer diameter and the width of your spool, plus the hub hole if the holder passes through the centre. Also check the thickness of the surface it will be mounted on, since many designs clamp or bolt to a shelf or frame.
Do reusable spools need special parts?
They usually come as two halves that screw or snap together around a refill coil, sometimes with a separate core or label ring. Check how the halves lock and whether the design expects a specific refill width.
How do I keep filament dry on the spool?
Printed containers and desiccant holders fit around or inside a spool to hold drying agent, and some designs close with a lid. Look at how the container seals, how much desiccant it holds and whether it fits the spool sizes you use.
関連
プリンターパーツ

Spool Organizer STL Models for 3D Printing

モデル202183件
プリンターパーツ

Filament Spool STL Models for 3D Printing

モデル103215件
プリンターパーツ

Spool Rim STL Files for 3D Printing

モデル2916件
ホビー・ものづくり

Line Spool STL Models for Fishing and Cable

モデル48665件
工具・機材

Filament Spool Winder STL Models and Respooling Tools

モデル209305件
プリンターパーツ

Qidi Q2 Spool Holder 3D Models and STL Files

モデル773022件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く