KNIFE guide ANGLE sharpener — Фото 2 из 5

KNIFE guide ANGLE sharpener — Фото 3 из 5

KNIFE guide ANGLE sharpener — Фото 4 из 5

3D-модель · Creality Cloud

KNIFE guide ANGLE sharpener

Площадка: Creality Cloud
Цена: $ 0.90
Лицензия: CC-BY-NC; Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы: STL

40 Лайки
14 Загрузки
10 Напечатали
40 В подборках
0 Бусты
1 Комментарии
2 539 Просмотры

Автор:TACIUCMARIUS

Опубликована 05.01.2024

Открыть на Creality Cloud

Описание

This really works very well and I, personally, am very pleased with the results.

Calculated angle for specific blade width as follows: - 25mm blade width. The blade makes a 15° angle to the stone. - 35mm blade width. The blade makes a 10° angle to the stone.

If the manufacturer of your knife recommends different angles and the width of your knife blade doesn't fall between these two limits listed above, please scale this part up or down according to your needs.

I printed this piece out of PLA. After 5-6 sharpening sessions, the guide part wears (grinds) off and a new one needs to be printed. However, this is still a good and very inexpensive solution compared to others on the market.

3D PRINTING SETTINGS 3 walls. 0.2 layer height. 15% cubic infill. 3-4 bottom, top layers. PLA, PETG, Nylon.