Subaru Impreza 02-06 Front Speaker Spacer

Subaru Impreza Bugeye, Blobeye, and Hawkeye front door speaker spacer holder for aftermarket speakers. 5.5" and 6" are the sizes of the speakers to be used with this spacer; it might accommodate 6.5" depending on the speaker cone depth. The reason you need to use this spacer for aftermarket speakers is that the original Subaru speaker has a very low profile.

Unless you're using the same low-profile speaker, you can't install any aftermarket speaker. This is because the window will foul the back of the speaker, damaging the speaker, the window, or both.

Print flat against the build plate; no supports are needed. Use a minimum of 30% infill. ABS is the best material to use due to the heat inside the car during summer; PLA might not hold up for this reason.