FLEXI TURTLE (KEYCHAIN AND FRIDGE MAGNET)

I made 2 models of flexible turtle, one with magnets and can be used as a fridge magnet, the other as a keychain.

For the model with magnets you will need 2 magnets with a diameter of 10 mm and height of 2 mm. The magnets are installed inside the model during printing, you don't need to use glue. Installing magnets inside gives the advantage of such as: magnets will not peel off and fall out, the appearance of models looks better. For the model with magnets you need to set the layer height to 200 microns and after the 13th layer set the automatic pause, for Bambu Lab slicer set the pause on the 14th layer.

I added STL files for all printers and 3MF file for Bambu Lab.

________________________________________________________

Don't forget to share your prints

________________________________________________________

If you have any problems, please email me

________________________________________________________

All my models are for personal use only

________________________________________________________

Don't forget to subscribe to me

________________________________________________________

Layer height - 200 micron

Perimeters 2 layers

Filling 15%

No supports needed