Easy Print K2 Plus Poop Chute Modular Magnetic Waste Bin Box

Easy Print Creality K2 Plus Poop Chute Shoot Removable Waste Bin Box Rear Mounted Magnetic System

Updated - XL Bin now added

Rear Mounted Poop management system for the K2 Plus. Designed to avoid the fans and for easy to printing with no supports required and you have the choice of bin size.

You just need to add 6 good quality (Neodymium) 8x3mm Magnets to the Upper part connecting the bin to the printer. Its best to use a spot of superglue when fitting the magnets. They are a tight fit so it is best to get them started then turn the upper part over and press down firmly until they are all home.

The ports around the top of the bin allow you to see when the bin needs emptying. To empty the bin, simply remove from the back of the K2, pop off the base and empty.

Top Tip - The Upper part is a tight fit on the Bin, If you struggle to fit the upper part just pop it into the freezer for ten minutes and pop it onto the bin.

Basic Print Settings

0.4 Nozzle

0.2 Layer Height

15 - 20% Infill

Supports - Yes for the neck only (Tree Supports)

You can also find me at Cults3D - 3DPFactory